Ultralight Ultralight Rifles

[SteveAndTheCrigBoys]

5x PA Microprism with the vertical spacer (no offset) was 9.5oz on my scale.

 

[packgoatguy]

In regards to the swfa 2.5-10x32 UL (BDC version) I've had good luck with them. Very easy scope to get behind IMO with a very bright and wide field of view considering its small size. I've found a trick with the BDC/SFP combo that works for me... I use it like a poor man's dialing scope. Basically, the different power changes the subtensions of the reticle, which I use to make a custom dope chart. Basically, from zero to 600 yards there is a combination of zoom and one of the ticks on the reticle that I can combine (within 3 yard increments) to get me a precise holdover. It sounds complicated, but in practice I find it only a second or two slower than my regular dialing scopes.

 

[doverpack12]

My Shaw portless is doing alright with AAC 77 TMK. 1.5” is about average for 5 shots. Some of that is me getting used to the light weight and trigger. I did have one group about an inch not counting a shot I called as me.
Hoping as I get used to the rifle it can do a little better or I might need to load for it.
I did go 3 for 3 on a 300 yard gong pretty easily.

 

[goalie]

My Shaw portless is doing alright with AAC 77 TMK. 1.5” is about average for 5 shots. Some of that is me getting used to the light weight and trigger. I did have one group about an inch not counting a shot I called as me.
Hoping as I get used to the rifle it can do a little better or I might need to load for it.
I did go 3 for 3 on a 300 yard gong pretty easily.

The AAC ammo has impressed me. I use the 77g OTM in competition to 500 out of my Geissele with good results.

That said, I'm gonna be loading for mine. I have a ton of primed 223 brass from my High-power days that I need to use.

 

[Thegman]

In regards to the swfa 2.5-10x32 UL (BDC version) I've had good luck with them. Very easy scope to get behind IMO with a very bright and wide field of view considering its small size. I've found a trick with the BDC/SFP combo that works for me... I use it like a poor man's dialing scope. Basically, the different power changes the subtensions of the reticle, which I use to make a custom dope chart. Basically, from zero to 600 yards there is a combination of zoom and one of the ticks on the reticle that I can combine (within 3 yard increments) to get me a precise holdover. It sounds complicated, but in practice I find it only a second or two slower than my regular dialing scopes.

Thanks for the thought on this. My biggest problem with the 2.5-10 is using it on 10x as the eye box gets too critical for me. Just messed with strelok a little and I can get the reticle to be pretty close out to 400 yards using 8x. Falls apart a little beyond that, but I rarely shoot further than anyway, and turning up to 8.5-9 pretty much fixes those ranges.

A bonus is 8x actually lined up better for my new 88ELD M load than 10x. It's pretty much right on out to 550. Haven't shot it with the SWFA yet, but looks like it will work well.

 

[PistolPete]

Working on a project to ease extraction and chambering. I got an aluminum bolt knob from Ebay and slapped it on - its huge, so I might shorten it, but I also really want a 6 ARC and wonder if this might make it doable. Definitely increases the odds of knocking it out of battery, but we'll see how it goes.

Anyone know of a 20" lightweight 6 ARC barrel?

View attachment 734330

Bringing this back up for the extended bolt knob inquiries. If you message "kitascreations" on ebay, he'll customize the hole dimensions. I requested a .190 through hole and a .350 countersink 0.25 deep on the back side of the knob, but then ground the knob a little shorter and had to open up the countersink for the 10-32 screw I used (use loctite!). It's aluminum, so not difficult to customize.

I cut off and used the neck of the original Solo bolt handle to fit between the bolt and the new knob. Plus he did it all for free and the knob was like $20.

 

[PistolPete]

Here's the final product now.

 

[KyleR1985]

Here's the final product now.

View attachment 792118

And does it cycle a 6mmARC spent cartridge reliability? Easily? Comparison to .223?

 

[PistolPete]

And does it cycle a 6mmARC spent cartridge reliability? Easily? Comparison to .223?

Haven't tried it. My biggest concern though is all the stress that it places on that small 10-32 screw in the aluminum carrier.