Toyota Tundra Owners

Joined
Jan 23, 2013
Messages
988
There's a reason you almost never see stock Toyotas.
The suspension is notoriously weak.
I would be very suspicious of the frame on those cars, too.
Not too long ago, there were some hilarious videos showing how flexy the Toyota frames are.
Did they ever box them?
I think I read the latest gen is a boxed frame, previous ones no. Latest gen didn't get much better payload numbers either. My gen is a "triple tech" frame lol. I'm sure you know but suspension upgrades don't actually increase payload. Tundras, built like a 3/4 ton in every way but payload capacity. But mine does pretty well at or a little over. I'd prefer payload to spare though, but that's just me!
 

JEck

WKR
Joined
Sep 28, 2022
Messages
356
Currently own a 2008 5.7 with 156k on it and been pretty reliable, have had to replace some wear parts and the ac compressor, but nothing major, plan on driving it to 225k or so then pass it down. Just picked up a mint 2016 SR5 with 18k miles for dirt cheap. Never going to get rid of that truck.
 

ETtikka

WKR
Joined
Oct 28, 2020
Messages
635
Location
East Tennessee
View attachment 842562View attachment 842563
2nd generation frames much more rigid than 1st. Not fully boxed, but plenty stout.
I had a '99 tacoma in my younger/dumber days.
Frame was rubber on that thing. I put that little truck through hell though and it never let me down.
It flexed so bad the bed rubbed the cab on many occasions...they would bend but not break...until they rusted through if you didn't get ahead of it.
1st gen tundra was pretty flexible too. I've no complaints with the 2nd gen though.
This stuff is good, 2 cans will do the whole underside

1740173380573.png
 

Jbxl20

WKR
Joined
Dec 29, 2020
Messages
882
Location
PA
Picking up a 2017 TRD crewmax w/ 65k tomorrow.Any of you guys have trouble with 4 Lo? I took it for a good 45 minute test drive today making sure to hit the red lights some highways and found a trailer park with speed bumps and lots of potholes to check for any noises. Found a stone parking lot to test out the 4wd. It didn’t want to go into 4 low at first and kept beeping/flashing. It finally went in and I didn’t have any issues after that. Dealer said the actuators are known to intermittently stick and is a matter of using it frequently to keep it freed up? Does this make sense to any of you tundra owners?
 

Jordan

Lil-Rokslider
Joined
Feb 29, 2012
Messages
174
Location
WA
Picking up a 2017 TRD crewmax w/ 65k tomorrow.Any of you guys have trouble with 4 Lo? I took it for a good 45 minute test drive today making sure to hit the red lights some highways and found a trailer park with speed bumps and lots of potholes to check for any noises. Found a stone parking lot to test out the 4wd. It didn’t want to go into 4 low at first and kept beeping/flashing. It finally went in and I didn’t have any issues after that. Dealer said the actuators are known to intermittently stick and is a matter of using it frequently to keep it freed up? Does this make sense to any of you tundra owners?
My buddy says all his Tundras have done that the first time he puts it in 4 low after he has not shifted to 4-low in awhile. I have a ‘21 and found that to be true and when I 1st did it at the dealer it took a minute but have not had a problem since. Curious if anyone else has experienced it as well.
 

Ucsdryder

WKR
Joined
Jan 24, 2015
Messages
7,030
My tundra has 18” wheels. I’d love a little more ground clearance without adding a lift. Anybody have an opinion on the “best” app around tire and size that will fit without modifications?
 

Jbxl20

WKR
Joined
Dec 29, 2020
Messages
882
Location
PA
the 2017 I just picked up has a leveling kit up front with 285/75/18 and they rub at full lock when turning Right. They are also half life.IMG_3129.jpeg
 

Attachments

  • IMG_3128.jpeg
    IMG_3128.jpeg
    1.7 MB · Views: 7
  • IMG_3130.jpeg
    IMG_3130.jpeg
    1.8 MB · Views: 7

mb6355

Lil-Rokslider
Joined
Jan 19, 2015
Messages
259
My tundra has 18” wheels. I’d love a little more ground clearance without adding a lift. Anybody have an opinion on the “best” app around tire and size that will fit without modifications?

Not an app but probably has the info you are looking for.
 

Jbxl20

WKR
Joined
Dec 29, 2020
Messages
882
Location
PA
From my limited research over the past few days it seems like 275/70/18 is the max to fit stock without many issues from most tires
 

Latest posts

Featured Video

Stats

Threads
361,805
Messages
3,828,986
Members
82,267
Latest member
c_gone
Top