The REAPER from Unknown Suppressors

[WI-Carcosa]

It is a “6.5mm” can. The bore will fit 7mm if your muzzle is threaded perfectly. An alignment rod will show it, and if it goes- 7mm is fine (though I don’t know if US will recommend that). It is the can I am using on everything 7mm and below now.

Will the reflex be the same size a the OG? Allowing for sp3 contours to work?

 

[Formidilosus]

Will the reflex be the same size a the OG? Allowing for sp3 contours to work?

See post #198

 

[WI-Carcosa]

See post #198

Ahh my bad thank you!

 

[fisherman983]

Anyone know how long the reaper will be on sale? I thought i saw it somewhere but cant remember. I already ordered one but a friend that's not online was curious.

Sent from my SM-S928U using Tapatalk

 

[Bluefish]

Anyone know how long the reaper will be on sale? I thought i saw it somewhere but cant remember. I already ordered one but a friend that's not online was curious.

Sent from my SM-S928U using Tapatalk

Jan 1st is what’s posted on the site.

 

[5811]

It is a “6.5mm” can. The bore will fit 7mm if your muzzle is threaded perfectly. An alignment rod will show it, and if it goes- 7mm is fine (though I don’t know if US will recommend that). It is the can I am using on everything 7mm and below now.

I'm surprised they are doing a 6.5 bore in spite of how vocal you are about smaller bores making almost no difference in dB.

Will there be a 30 cal version in the future?

 

[ezwy]

The OG 6.5 will be out Sept 12th
View attachment 928269

Cliff and I put 60 rounds of 7mm Rem Mag through it in about five minutes. I have 52 rounds of 6UM though another with zero issues.

View attachment 928268

So are all OGs after the 12th going to be under 8 oz or is that just the 6.5?

 

[Formidilosus]

I'm surprised they are doing a 6.5 bore in spite of how vocal you are about smaller bores making almost no difference in dB.

Muzzle forward cans it makes almost very little to no difference. For whatever reason it does make a noticeable difference in some/maybe most reflex or OTB designs.

Will there be a 30 cal version in the future?

I don’t know.

 

[5811]

Muzzle forward cans it makes almost very little to no difference. For whatever reason it does make a noticeable difference in some/maybe most reflex or OTB designs.

That's really interesting. Thanks.

 

[cuerro viejo]

View attachment 927999


View attachment 928002

Does it reduce recoil at all?

There is a significant difference in my AB rap 8 and OG in recoil reduction (6lb 6CM) it’s weird. The OG is perfect for my personal truck gun 16” 22 CM and 223 trainer. I need one more suppressor that has ability to run with end brake, for my daughters 6CM

 

[Formidilosus]

Does it reduce recoil at all?

There is a significant difference in my AB rap 8 and OG in recoil reduction (6lb 6CM) it’s weird. The OG is perfect for my personal truck gun 16” 22 CM and 223 trainer. I need one more suppressor that has ability to run with end brake, for my daughters 6CM

I’m sure it does a bit, it’s a much larger can.

 

[Presswood_936]

I'm surprised they are doing a 6.5 bore in spite of how vocal you are about smaller bores making almost no difference in dB.

Will there be a 30 cal version in the future?

A tighter bore absolutely makes a difference

 

[Ryan Avery]

Which 7mm bullet?

Forty of them were snorty reloads from best of the west, 180g VLDs. I don't remember what the other box was 150g something...

 

[Moccasin]

The OG is nigh unbreakable. The new can took 50 rounds of 7mm REM Mag back to back without issue.

And what of tone, good sir? Did your sensitive ears note changes related to lightening or reduced bore?

 

[Formidilosus]

And what of tone, good sir? Did your sensitive ears note changes related to lightening or reduced bore?

Haha. It sounds good. Has the same general sound as most OTB cans, but less pop.

 

[Unknown Suppressors]

I'm surprised they are doing a 6.5 bore in spite of how vocal you are about smaller bores making almost no difference in dB.

Will there be a 30 cal version in the future?

We are working on it, we haven't made something better in 30 cal better than the OG. We have a lot more development left to do before we have a Gen 2 OG. A big driver for why the OG65 is quieter is the bore is smaller. We discovered this a couple weeks ago. The weight change was driven by what we learned making the reaper!

 

[Unknown Suppressors]

So if we already have a OG on order with a September print date, are we getting the lighter version or the original? Is the OG-L getting lighter as well?

We have not decided yet.

 

[Unknown Suppressors]

Is this what they're calling the predator on the roadmap page or is that a different can (specific to 6mm).

No this isnt the preditor. though it would make an excellent preditor can. The OG65 came out of left field as a "random prototype" that was so good we decided we have to offer it as a product....

 

[Unknown Suppressors]

What’s the inside diameter of the reflex for the Reaper?

John

To be determined. More testing required!

 

[benconfused]

No this isnt the preditor. though it would make an excellent preditor can. The OG65 came out of left field as a "random prototype" that was so good we decided we have to offer it as a product....

Sweet, then this will be my Q4 purchase!