The REAPER from Unknown Suppressors

[DWro17]

@Ryan Avery does anyone have a liberty Mach-s to compare this to? I have one it’s great but wonder how this compares.

 

[khuber84]

I have an abel theorem S at 5.6" is gladly bring to a test session, as well as near a dozen other cans!

 

[flyfisher117]

Glad I didn’t impulse buy the Nomad TI XC last weekend. Lol

Just curious. It says to keep the can under 800 degrees. Just curious if anyone had any idea how many rounds it takes to hit that temp? Pretending 223 or a cartridge like 6.5 Creed. Yes I know ambient conditions and the specific load itself will change that number.

 

[Shortschaf]

It says to keep the can under 800 degrees. Just curious if anyone had any idea how many rounds it takes to hit that temp?

This is a material driven limit, shared by all cans made of titanium

I don't know how many rounds it takes, but I have never heard of anyone actually torching a titanium can with a bolt action rifle. You can exceed that temp too, you just have limited life above it

A couple online sources say it takes a couple mag dumps from an AR to get there.

 

[flyfisher117]

This is a material driven limit, shared by all cans made of titanium

I don't know how many rounds it takes, but I have never heard of anyone actually torching a titanium can with a bolt action rifle. You can exceed that temp too, you just have limited life above it

A couple online sources say it takes a couple mag dumps from an AR to get there.

Thanks I figured most every lightweight TI fan had a limit. I just wanted to make sure it would be Ok for range plinking. No AR burn downs. Every once in a while I get the urge to play with the large spinning target at the range.

 

[Andouille]

Any hard data on the dBA rating of the reaper with 30 cal magnum cartridges? The testing shows this can will handle magnum without blowing up, but it's unclear how a 308 at 127 dBA compares to my 300 WSM with 40% or so more powder.

 

[Ryan Avery]

Any hard data on the dBA rating of the reaper with 30 cal magnum cartridges? The testing shows this can will handle magnum without blowing up, but it's unclear how a 308 at 127 dBA compares to my 300 WSM with 40% or so more powder.

The 6UM 20” was 131 dB

 

[TxLite]

I know it's HUB compatible so my ASR mount will fit, but is it ASR brake compatible?

As in, is the blast baffle deep enough to accommodate a standard 3 port ASR brake?