stockys vg vs peak 44 bastion

[JCMCUBIC]

I have the Bastion and the Blacktooth. RedHawk has them in stock and ready to ship at times. Mine were delivered in about 4 or 5 days. Bastion is the Sporter and I got the Blacktooth in the Compact as that’s what they had at the time. I did ask RedHawk and they replied that they are the same, just inletting is different at the barrel channel but doesn’t take a lot to clear the Sporter barrel. I cleared the tip of the fore end in less than 5 minutes and it’s floated. The inletting on the Compact, to me, is a nicer fit than the Sporter stock. There’s quite a bit of room in the Sporter for the Lite series.

Thanks for posting those pics. I've been playing with a Peak 44 for a few weeks now and I was curious if all of their stocks had such a shallow inlet for the action/recoil lug that the action sat well above the stock's line for the action's port opening. I see both of yours do as well. When I first installed mine I thought the lug wasn't seated.

 

[Kauaihunter]

Thanks for posting those pics. I've been playing with a Peak 44 for a few weeks now and I was curious if all of their stocks had such a shallow inlet for the action/recoil lug that the action sat well above the stock's line for the action's port opening. I see both of yours do as well. When I first installed mine I thought the lug wasn't seated.

You’re welcome. That bothered me a bit too at first but they shoot just fine. I did bed a little around the lugs to the sides of the action with epoxy. I didn’t like how the action could rock or would just fall out of the stock with the action screws removed.