
My wore out bench gun.
Haven't shot it in several years now.
17 lb Stolle Teddy
Kelby M1 stock
Gary Schneider 1-8 6mm HV .
6mm Dasher
Vias brake
Kelby 25moa rings.
Mounted up the sig sour whiskey 4
4-16x44 MOA scope.
Old match ammo from 4 years ago.
After I got it squared up and clamped down,
shot this at 100.
Sucker still shoots good.
Tall target test at 100 yards.
Messed around zeroing it up.
Seemed like every id set it.It would be off alittle.
So I had to played with it some.
Close enough.
Used a 24 flexible steel rule and did a line at 30 inches. Thought about it a little bit and then did 30.41 for 30 MOA. That's what I dialed on the scope.
The scope is 25 MOA per rev. Went 5 more.
Fired 2 into the lower target on the right
Dialed up 30 and shot 3 and 4
Dialed back down and shot 5 and 6 at zero.
Dialed back up 30 and shot 7 and 8.
I'd say it's working.