- Joined
- Sep 28, 2023
- Messages
- 2,442
1:7 on that one. .680 taperlessWhat barrel twist?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
1:7 on that one. .680 taperlessWhat barrel twist?
I bought that stem and it works with the 107s but still leaves a light ring on the 116s.Has anybody using Hornady Custom Grade Dies, replaced their seating stem with the one they make for the 110 A-Tip? Curious if that would be a better fit for these bullets, as the standard stem in my seating die is leaving a pretty heavy ring on these TMKs and preferably not buy a new seater.
Yeah you’re right. They haven’t shot terribly for me by any means. Normally right around .8 for 10. They just shoot a little wider than a berger, and only on occasion. Which isn’t terrible considering the Berger is basically the gold standard just for precision, and these are mainly for killing things with nice wounds, while maintaining still well enough precision to do it out to a long ways.Haha.
I got a 500ct box of production 116’s and just grabbed a big handful of bullets from it- nothing bad or unusual with the tips.
For sure extreme precision (.5-.7 MOA) is easier with Berger’s in a few flavors (105gr Hybrid) than almost any other bullets. But, the TMK’s have all been 1 MOA for ten or better with little to no effort for dozen guns or so that I have used them in.
Sweet Jesus. That’s an awesome upgrade all the way around.With the same load of N570 as the Dtacs in my 6-7 PRC, the 116 TMK's shoot about 40 fps faster (3320) and .2" smaller.
Tikka 243 8twist cut to 17" with 38.5 H4350 116tmk.View attachment 1050806
Was pretty slow.
Loaded 10 more at 39.5gr H4350.
DA was -400 when I shot this morning. Doesn't appear to be stable 2610fps. View attachment 1050807
Have you tried the 107s yet? Curious how they compare in the 8 twist 243I’ve been experimenting with them today in my 20” 1:8” twist Tikka .243. So far, I haven’t been thrilled with H4350.
My velocity has been very consistent, but the groups haven’t been great. I am going to try 40.5, then switch powders.
38.5 - 2631
39 - 2672
41 - 2797
41.5 - 2839 (pressure signs)
Have you tried the 107s yet? Curious how they compare in the 8 twist 243
Has anyone tried the #397113 (105gr Aeromatch) stem on these?I bought that stem and it works with the 107s but still leaves a light ring on the 116s.
Yes, I use the VLD stem with the ELDM and X's. I use the same stem with the 77, 107, and 116 TMKs and get no rings.Has anybody using Hornady Custom Grade Dies, replaced their seating stem with the one they make for the 110 A-Tip? Curious if that would be a better fit for these bullets, as the standard stem in my seating die is leaving a pretty heavy ring on these TMKs and preferably not buy a new seater.
Excellent, thanks!Yes, I use the VLD stem with the ELDM and X's. I use the same stem with the 77, 107, and 116 TMKs and get no rings.
I use the regular stems with the BTHP and Aeromatch bullets.
No, they are next. I have such high hopes for the 116s that I have not opened the 107s yet.
Awesome keep us updated!I finally tried the 107s as the light was fading. Even with me having difficulty finding the aiming point, my first group was still better than anything I saw from 116s and 4350 today.![]()
They averaged 2796 with an SD of 10. If I can do slightly better than that in the morning, I’ll be happy with the 107s.