Show your Tikka ten round groups

[TheM1DoesMyTalking]

Tikka T3X 223 RSS 18" with DD Wolf Hunter





This barrel has a strong preference for the AAC 75 BTHP over the AAC 77 OTM.

 

[littlebigtine]

Real happy with this for factory eldms coming out the tube.

 

[Schmo]

Real happy with this for factory eldms coming out the tube.

View attachment 882912

What barrel?

 

[littlebigtine]

What barrel?

OMR prefit

 

[Schmitty]

My T3x Lite is a little finicky but it does like the 68-69 grain bullets.

 

[Wrongside]

LH Tikka T3x Varmint 223 shooting 75ELDs loaded for a rifle I traded off. Body sized, re-seated for consistent OAL. Shoots pretty decent for cartridges that've been messed with.

100 Meters. 0.1 Mil target grid.

 

[Lawnboi]

First group out of the 21” hunting weight dasher. The far left was me but I’ll still count it.

Hard to tell but there’s 10 in there.

 

[Schmo]

First group out of the 21” hunting weight dasher. The far left was me but I’ll still count it.

Hard to tell but there’s 10 in there.


View attachment 883855

I suppose it’ll do . . . for now.

 

[Harvey_NW]

First group out of the 21” hunting weight dasher. The far left was me but I’ll still count it.

Hard to tell but there’s 10 in there.


View attachment 883855

No fooling around with them Dasher barrels, they are the "node".

 

[Lawnboi]

No fooling around with them Dasher barrels, they are the "node".

That’s the same charge from my match gun load. Same seating depth with Hornady 105 hybrid copycats. Hopefully it shoots 103eldx acceptably.

Exactly as planned, hard to pull out the 223 when I have this.

 

[ResearchinStuff]

That’s the same charge from my match gun load. Same seating depth with Hornady 105 hybrid copycats. Hopefully it shoots 103eldx acceptably.

Exactly as planned, hard to pull out the 223 when I have this.

What mags are you using for the dasher?

 

[Lawnboi]

What mags are you using for the dasher?

Aics mag with primal rights spacer.

I do have a waters rifleman 6 round br/dasher mag if anyone is interested. Probably going to sell my other eh1 and 223 WR mags as well and swap to two hnt 26 chassis.

 

[littlebigtine]

Aics mag with primal rights spacer.

I do have a waters rifleman 6 round br/dasher mag if anyone is interested. Probably going to sell my other eh1 and 223 WR mags as well and swap to two hnt 26 chassis.
View attachment 883913

View attachment 883914

How much for the wr 223 mag? That runs in a tikka bottom correct?

 

[Lawnboi]

How much for the wr 223 mag? That runs in a tikka bottom correct?

Yea it does. Factory tikka. I’d rather sell them as a pair (6rd and 10rd).

I’m still in the process of deciding if this is what I want to do. But it’s leaning that way.

 

[littlebigtine]

Yea it does. Factory tikka. I’d rather sell them as a pair (6rd and 10rd).

I’m still in the process of deciding if this is what I want to do. But it’s leaning that way.

Let me know and I would more than likely take them off your hands

 

[Deadspace]

First group with my tikka 223 after a quick load development. 20 rounds in a little over 1” and trued to 700 yards today. Looking forward to posting a moose in the 223 thread in September!

 

[JJ3]

308’s.

View attachment 184794View attachment 184795View attachment 184796View attachment 184797


185gr Jugg
View attachment 184798


Various factory ammo, 100 yards. All 10 rounds, except far left sighter.
View attachment 184799

The 308s seem to be exceptionally accurate across the board for tikkas from what I have seen.

 

[TX_Diver]

Few from the 6.5cm (stock barrel cut) rokstock swfa 3-9

Zeroing after swapping stocks.

6.5cm on left. 6arc with preferred prefit on right (shots 5-22 on the barrel here)

 

[TX_Diver]

6.5cm

Top
bipod front
comparing ls wild ultralight to a Taylor the Answer rear bag. No change to zero from above so I’m curious if I do something that leads to a different POI with the bipod…


Bottom
comparing LS wild mini git lite to pint size GC std (not really fair) from kneeling (both knees on ground). Bag on a rock, no rear support

 

[TX_Diver]

Some quick checks with staball 6.5 in the afternoon. Bipod up front and I’m hitting low left again. These are untested loads though so it’s not really a fair comparison.

Occasional ejector mark but no heavy bolt lift. Probably going to roll with this and some eld-x blems for the next batch then go back to h4350 and eld-M for hunting season. I have a Culvers 90 measure coming to try and get rid of the slow electronic dispenser.

I’ll have to test the bipod POI shift further though on another range trip