Show your Tikka ten round groups

IMG_8007.png

Tikka t3x 6creed
Krg echo
Magnus s rr

Gotta be the most shootable/affordable stock Ive ever tried. The stiffness on the echo isnt quite there but for $350? Ill throw this gun in the mcmillan LR tracker when I get it to see if the groups can tighten up at all.
 
I always manage to mess up one shot out of the 10. I came down 0.3 mil from first to second target. That’s a 1.5” dot for reference…
 

Attachments

  • IMG_0310.jpeg
    IMG_0310.jpeg
    408.6 KB · Views: 37
  • IMG_0311.jpeg
    IMG_0311.jpeg
    521.8 KB · Views: 31
Here’s two 10 round groups through my Cz457 at the Lapua rimfire test center. Both groups individually at the top and then the 20 round group is the larger target. IMG_5286.jpegAnd then the same exact groups but measured at 100m instead of 50 (laser range tests both consecutively) IMG_5287.jpeg
What a cool process. Will be back once I get a new llija or similar barrel for it.
 

Attachments

  • IMG_5286.jpeg
    IMG_5286.jpeg
    262.4 KB · Views: 17
  • IMG_5286.jpeg
    IMG_5286.jpeg
    276.3 KB · Views: 16
  • IMG_5287.jpeg
    IMG_5287.jpeg
    261.9 KB · Views: 15
Tikka T3x lite 270 Win with a Harvester Evo and a 3-10 SHV. 10 shots of factory Precision Hunter into .973”. @Jimbee sent me this barrel for the cost of shipping and it now has well over 1000 rounds on it. What a guy!

P.S. this barrel is threaded 9/16th and it has an adapter up to 5/8ths. It’s threaded at 22”. No issues whatsoever.
 

Attachments

  • IMG_3960.jpeg
    IMG_3960.jpeg
    495.1 KB · Views: 35
This one might have only been 8 rds, might be 10? But it’s really good for a factory 6.5 CTR barrel shooting $1.20 factory Norma 130 gr match ammo. Just slow and inconsistent velocities. Think it was SD around 19 and ES in the low 60s over 20 ish rounds.
963622FA-D29D-4553-AFD2-D773F879507C.jpeg
 
IMG-7642.png

Tikka T3X 6.5 PRC
IBI barrel
Sierra 145gr TGK
 
Tikkas were hammering today. Bought a few new rifles over the winter and finally got around to shooting groups.

Rifles shot
T1x .22LR in a krg bravo with an sig srd22x shooting 40 gr wolf extra match subs. SWFA fixed 10x
24” UPR (CTR) 6.5cm with a TBAC ultra 9 gen 1 in a KRG Bravo @wind gypsy recently sold me. Topped with a nx8 2.5-20. 2k+ out of this thing and it still absolutely hammers shooting 147 ELD-Ms.
20” CTR 6.5cm in a KRG Bravo with a AB Raptor 8. Topped with a Maven RS 1.2. 140 gr American Gunners shot ok but also hammers with 147 ELD-Ms
20” CTR .308 in my old Tikka UPR stock. Shot with the same AB Raptor 8. Topped with a NXS 2.5-10. Shot 175 gr SMKs and 168 gr ELD-Ms and it hammers

Bonus - all the mk12 hype got to me and I built a wannabe off an LMT with a OCM-5. Topped with a VUDU 1-10 which I’m not loving for precision work but rifle shot pretty well with razor core 77 gr and black hills 77gr

Enjoy!

All factory ammo btw
 

Attachments

  • IMG_2778.jpeg
    IMG_2778.jpeg
    507.4 KB · Views: 35
  • IMG_2786.jpeg
    IMG_2786.jpeg
    486.4 KB · Views: 33
  • IMG_2787.jpeg
    IMG_2787.jpeg
    482.4 KB · Views: 32
  • IMG_2781.jpeg
    IMG_2781.jpeg
    440 KB · Views: 32
  • IMG_2782.jpeg
    IMG_2782.jpeg
    485.7 KB · Views: 32
  • IMG_2783.jpeg
    IMG_2783.jpeg
    451.7 KB · Views: 32
  • IMG_2784.jpeg
    IMG_2784.jpeg
    525.4 KB · Views: 32
  • IMG_2785.jpeg
    IMG_2785.jpeg
    429.4 KB · Views: 36
  • IMG_2776.jpeg
    IMG_2776.jpeg
    459.2 KB · Views: 33
  • IMG_2775.jpeg
    IMG_2775.jpeg
    473.2 KB · Views: 34
223 18”
73 ELDM Factory
200yd prone. Relatively quick shooting.
2643 avg velocity
17 std
68 es
 

Attachments

  • image_cropper_08A03F8C-EF14-46A5-9DB0-C7FC4B2AAF96-9831-000004232ABB0D2A.jpeg
    image_cropper_08A03F8C-EF14-46A5-9DB0-C7FC4B2AAF96-9831-000004232ABB0D2A.jpeg
    235.5 KB · Views: 57
  • IMG_6325.jpeg
    IMG_6325.jpeg
    798.2 KB · Views: 56
  • Like
Reactions: BLJ
I'd like to know as well. I had a 24" Tikka 6.5cm with 147eld going somewhere in the 2700s, maybe almost 2800, with staball 6.5. accurate as hell. But it was also real hot. No pressure signs but it did crater primers. Was using rem 7.5 SRP
 
Creedmoor or PRC?

nice, how are you getting that velocity in a 6.5 Creedmoor?
Been using this load since 2017 is a couple 6.5 Creedmoors. Lapua brass, CCI 450s, RL-26. Though I've found RL-16 is within 30 FPS of what RL-26 got me so I save my RL-26 for my WSMs now.
 
Bought a barreled action off the classifieds in 6.5PRC. Barrel is a PBB. 10 shots at 57.5gr N565, 156, new ADG, Fed 210m, SD of 3.6 over the 10 shots.
IMG_7018.png

Adjusted the scope and shot 3.
IMG_7041.jpeg
 
Back
Top