A Superlite 7 Mag is not going to be easy to shoot little bug hole groups. 1” 10 round group is excellent. You got your load.
I think so too, and thank you. It's a heck of thump, and my first magnum so I'm definitely humbled.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
A Superlite 7 Mag is not going to be easy to shoot little bug hole groups. 1” 10 round group is excellent. You got your load.
I think so too, and thank you. It's a heck of thump, and my first magnum so I'm definitely humbled.
Mine has that accuracy with 140 match burners and star line srp brass. I use cci450. I haven't tried it with lrpHere's a group with a question.
Fired ten rounds from my T3x in 6.5CM into a little less than 0.7" inches yesterday.
I'm shooting a 140gr Sierra Tipped Gameking over 41.9gr H4350 in Starline SRP brass with BR-4 primers. Really happy with the results.
So here's my question -- I've fired over 200 rounds of this handload, using large rifle primers, in three different rifles and it shoots ten shot groups into about 1.2-1.3 MOA, reliably. This was my first attempt with small rifle primers with this bullet, and I plan to shoot another group this weekend. Anyone else seen 6.5 CM groups tighten up just by switching to small primer brass? Or is this just an anomaly?
Good to know, thanks.Mine has that accuracy with 140 match burners and star line srp brass. I use cci450. I haven't tried it with lrp
Curious, as I don't use that Hornady app... are the green and blue circle x's used to indicate an inch for reference? If so, aren't those orange circles 1" at the outer edge?I must be odd man out … I don’t get groups anywhere near what other folks are getting. here are my “10 round groups”.
- 7PRC - 168 LRX, ADG, CCI250, 67.5g RL26 … C6 20” Barrel
- 6.5CM - Tikka barrel cut to ~20”. 2 loads: 127LRX and 135 DRT … both Peterson brass CCI200, 46.5g StaBALL 6.5
- 223 - Tikka barrel cut to 18”. 2 loads: 77TMK w/ 26.5 CFE223 Starline brass and CCI400, other is 79 DRT factory
![]()
Judging by perspective, I think those are 2" targets. Here's a 6.5mm group on 1" target for reference.Curious, as I don't use that Hornady app... are the green and blue circle x's used to indicate an inch for reference? If so, aren't those orange circles 1" at the outer edge?
Just wondering if maybe you're selling yourself short on the measurements.
We are not posting up the worst ones, but those are pretty badI must be odd man out … I don’t get groups anywhere near what other folks are getting. here are my “10 round groups”.
- 7PRC - 168 LRX, ADG, CCI250, 67.5g RL26 … C6 20” Barrel
- 6.5CM - Tikka barrel cut to ~20”. 2 loads: 127LRX and 135 DRT … both Peterson brass CCI200, 46.5g StaBALL 6.5
- 223 - Tikka barrel cut to 18”. 2 loads: 77TMK w/ 26.5 CFE223 Starline brass and CCI400, other is 79 DRT factory
![]()
![]()
![]()
![]()
![]()
Sent from my iPhone using Tapatalk
I must be odd man out … I don’t get groups anywhere near what other folks are getting. here are my “10 round groups”.
- 7PRC - 168 LRX, ADG, CCI250, 67.5g RL26 … C6 20” Barrel
- 6.5CM - Tikka barrel cut to ~20”. 2 loads: 127LRX and 135 DRT … both Peterson brass CCI200, 46.5g StaBALL 6.5
- 223 - Tikka barrel cut to 18”. 2 loads: 77TMK w/ 26.5 CFE223 Starline brass and CCI400, other is 79 DRT factory
![]()
![]()
![]()
![]()
![]()
Sent from my iPhone using Tapatalk
Proof?Despite all the crap posted here , load development matters, seating depth has a big bearing on accuracy
Crap like thisWe are not posting up the worst ones, but those are pretty bad
Despite all the crap posted here , load development matters, seating depth has a big bearing on accuracy and technique really matters with light rifles