Show your Tikka ten round groups

[Leinad]

Tikka compact .308 chopped and threaded to 16”, suppressed. 3x15 Burris. Prone over pack @ 100yds. First ever 10 round group. Here’s to improving next time!

 

[DisplacedHusky]

View attachment 743768

10rds. For reference, it's a 1.5" orange dot.

Who did your barrel?

 

[Wyo_hntr]

Who did your barrel?

It's a proof prefit. Unfortunately they discontinued the all steel barrels.

I have a preferred on order.

 

[Jlop_2]

First 10 round group attempted today. Factory tikka T3, 7mm rem mag. Cut to 20” with 7” suppressor. Shooting 162 eld x factory ammo. 100 yards, 1” circle. Off a bench.
About 80 rounds through the rifle. Sportsmatch rings, Trijicon credo.

Question is, Do I adjust my scope windage 1/4 to the left or leave as is??

 

[Jimbee]

First 10 round group attempted today. Factory tikka T3, 7mm rem mag. Cut to 20” with 7” suppressor. Shooting 162 eld x factory ammo. 100 yards, 1” circle. Off a bench.
About 80 rounds through the rifle. Sportsmatch rings, Trijicon credo.

Question is, Do I adjust my scope windage 1/4 to the left or leave as is??

My app says one click left (mils)

 

[Jlop_2]

Awesome, thank you sir!

 

[menhaden_man]

41.5 gr H4350 with some rough Hornady brass (6x?), 140s, and CCI 200. T3x light 6.5 CM and SWFA UL.

 

[PineBrook413]

Tikka t3x 22” .223 in a rokstok with 10x swfa.

Black hills 77 tmk. Barrel has about 50 rounds down the tube just testing out a few factory options.

Hornady black 75 did 1.2” for 10
Xtac 77 otm did 1.4” for 10
Federal GMM 73 gr did 1.2” for 10

77 tmk were the fastest and the best group. Ordered a few cases to get me started.

Sent from my iPhone using Tapatalk

 

[willfrye027]

20 rounds, factory tikka 223 in a rokstock. El cheapo reloads (cheapest combination of components with a higher BC bullet I could find) with ABC 75gr BTHP, starline brass, lever, CCI 400s at 2820 fps.

 

[Bluumoon]

Really opened up on me today. Last group was around 0.7”

 

[BKM]

Stainless tikka in a Bravo
H4350 130tmk

 

[steelheadmike]

T3X 7mm-08
Factory barrel cut to 19”
Suppressed
Factory Hornady 139gr SST @2800 (chrono)

Adjusted after first shot (high/right)

Sent from my iPhone using Tapatalk

 

[TX_Diver]

A few 10s and an 18.

 

[menhaden_man]

Does two 5-shot groups count?

 

[walk2112]

Does two 5-shot groups count?

View attachment 753466

When overlaid those would make a nice little 10-shot group, so my vote would be that it counts haha.
Nice shooting! Curious is that a factory barrel?

 

[menhaden_man]

When overlaid those would make a nice little 10-shot group, so my vote would be that it counts haha.
Nice shooting! Curious is that a factory barrel?

Yes, it’s a T3X stainless lite. Guys in her coerced me into getting with the program maybe 5 years ago.

2.5-10x32 SWFA to boot. My aging eyes couldn’t really tell what was going on down range this morning. I’m now waffling between swapping scopes and not touching something that works.

 

[gulfofmexicoflyfishing]

I recently rebuilt my 20” tikka CTR in 6.5 creed. Chopped/fluted the barrel at 16.5”, new high desert bottom metal and sporter mags, stocky’s tikka hunter VG stock. Previously the barrel had 450rds on it with no cleaning. I ran some patches soaked in C4 through the bore to ensure any debris from machining were removed, and fired 8rds to adjust my zero prior to shooting this group.

147 ELD-M in new lapua brass. 41.5gr of h4350 at 2.850 coal.

 

[JollyRoger]

10 round group from today
6CM, RokStok, Maven, etc

 

[TX_Diver]

13 rds

 

[TheCougar]

I’m concerned about the zero shift. This is with the Maven, properly mounted. No clue why the .3mil zero shift off a previously validated zero. But that cheap Hornady Black 75 BTHP shoots pretty darn good. I didn’t bother to measure it, but it’s sub-MOA for that 12 shot group.