Seekins Chassis now available

[Tahoe1305]

Can you confirm OAL max?

 

[Marcjr47]

Can you confirm OAL max?

This is a stock MDT poly mag. I’m getting 2.8700” inside the mag for longest cartridge that can fit would be just slightly less than that.

 

[_MountainBum]

the 6.5 PRC and larger cartridges remain the question…

 

[Marcjr47]

the 6.5 PRC and larger cartridges remain the question…

My seekins carbon 3rd mag for my 6.5prc does not fit if this is what anyone is wondering

 

[OneMore]

View attachment 1024734

What tripod is this?

 

[TBoschma]

What tripod is this?

Aziak ridgeline

Be my go to recently really like what he’s doing and he’s a Montana guy

 

[ElevateIdaho]

View attachment 1024734

What’s the specs on this? Who did your cerakote work? Sweet build!

 

[Tahoe1305]

It’s the short action AICS mag

Apparently it is the PRC mag and long action mag that will NOT work. If I had a long action hunter chassis I’d try, but for the purposes of my 22cm these work great.

@_MountainBum do you know what the OAL
Of the Seekins CF SA AICS mag is by chance? I don’t see it published

 

[_MountainBum]

@_MountainBum do you know what the OAL
Of the Seekins CF SA AICS mag is by chance? I don’t see it published

I’ll post a measurement in the morning!

 

[wind gypsy]

the 6.5 PRC and larger cartridges remain the question…

They are not AICS mags, I don’t know why there is a question about them?

 

[_MountainBum]

@_MountainBum do you know what the OAL
Of the Seekins CF SA AICS mag is by chance? I don’t see it published

 

[Tahoe1305]

That’s awesome thank you. Appear to be close in weight to the flush MDT plastic. But I need that extra length. Life debate on if it’s worth 3x the cost!

 

[_MountainBum]

That’s awesome thank you. Appear to be close in weight to the flush MDT plastic. But I need that extra length. Life debate on if it’s worth 3x the cost!

For the ability to buy 3 mdts at the price of 1 Seekins I’d say load to max length if MDT’s and see if it’s usable haha

 

[_MountainBum]

For those with OMR or other larger contour barrels, opening up the channel is pretty easy. Patience and some sweat equity.

7/8” through 1 1/4” deep sockets for concentricity & to match barrel contour/open up edges.

40, 60, 80, 100 grit sandpaper, 40 is the heavy material mover, progress to finer grit to finish.

Periodically check clearance.

OMR barrel floated and lost an ounce of weight.