I'll post some written instructions here:
1. Set the distance of the stake out points where 3 seams come together. Set those at 10'6" gross grain to gross grain loop .. the stake outs will be a little longer because of the line locs and cordage
2. Set your poles to 125 or 130, we use 130 for most examples but it can go down to 120
3. Set the 2 opening stakes, it should be a slight diamond. (About 10 ft from stake to stake on the door )
4. You may need to tension the cordage at the top via the line loc. Ideally, the stake out loop ends at the 2 line locs on the bottom, thus tension the top a hair may be needed. This is really a one time thing
That is it. Don't over tension initially, just set them and then tighten the line locs.