Scope rings and pic rail bedding

[SaltyAquaholic]

Hello,

I believe this would be the correct place for this. So I’ve read through the forums, saw some people bed their pic rails and optics in the rings. Do more research and there’s a big opinion that manufacturing tolerances have gotten low enough that it’s not needed, some say it’s still needed. So, the point of this post is I’d like to hear from two groups of people if possible to get a better picture for myself on if it’s worth setting up and doing.

The first group of people I’d like to weigh in are the people who have bedded rails and scopes in the past and have stopped doing it and why. The second would be people who currently do it and their justification for it, preferably with examples that are recent (within 5 years or so). I understand it’ll come down to personal preference and risk assessment. Just would like a bit more knowledge to sway me one way or the other.

Thank you for your time

 

[Q_Sertorius]

This is what I do:

Scope mounting to maintain zero

https://r.tapatalk.com/shareLink/topic?share_fid=45046&share_tid=78482&url=https%3A%2F%2Fwww%2Erokslide%2Ecom%2Fforums%2Findex%2Ephp%3Fthreads%2FScope-mounting-to-maintain-zero%2E78482%2F&share_type=t&link_source=app

 

[WeiserBucks]

I bond all rails and don't bed quality rings.

 

[wapitibob]

I always bed the rail.

Speedy beds his rings, seems a bit overkill for a hunting rifle.

 

[JMundy84]

I bed rails on 700s they don't have great tolerances on the actions and it's easy to see a bow in your rail with a straight edge so no matter how well machined the rail and rings are it's putting stress on your scope.

 

[SaltyAquaholic]

This is what I do:

Scope mounting to maintain zero

https://r.tapatalk.com/shareLink/topic?share_fid=45046&share_tid=78482&url=https%3A%2F%2Fwww%2Erokslide%2Ecom%2Fforums%2Findex%2Ephp%3Fthreads%2FScope-mounting-to-maintain-zero%2E78482%2F&share_type=t&link_source=app

I’d found some comments on other threads from Form about it but hadn’t found his actual write up. Much appreciated. That’s basically the system I have currently except I don’t use a paint pen and I have done anyting with the action screws. Basically everything gets cleaned and thread locker

 

[SaltyAquaholic]

I always bed the rail.

Speedy beds his rings, seems a bit overkill for a hunting rifle.

Part of me wonders how much of this was necessary 20-30 years ago because of manufacturing processes and are now placebo effects now that manufacturing has increased the precision of their tolerances.

 

[wapitibob]

Part of me wonders how much of this was necessary 20-30 years ago because of manufacturing processes and are now placebo effects now that manufacturing has increased the precision of their tolerances.

A chitbox Haas cnc won't cut round when it's on the showroom floor, some ring mfg's are lying to you about holding .0001" and those shops aren't spending $300,000 on equipment to check .0001" roundness.

 

[Stud Duck]

I follow this video and allow the receiver to tell me what I do.

What a properly bedded rail looks like:

 

[Wrench]

Bed the rail. The amount of shear and the ever increasing weight and height of scopes makes this a potential payback. I use 10110 and wipe it up wet with a wd40 soaked qtip. I buff a light coat of Johnsons paste wax on the action before the bedding.

Rings, I do not bed....but with the average height of scopes continuing to rise, I may move to bedding the ring/rail connection....release on all sides and pay attention to the mechanical lock points.

 

[JMundy84]

I follow this video and allow the receiver to tell me what I do.

What a properly bedded rail looks like:

View attachment 1016187

View attachment 1016188

This is the same video I've followed to do a few

 

[Stud Duck]

This is the same video I've followed to do a few

It's the best one I've found on the subject.