Rx8 new strings now cables rub cam

[MT257]

Put new strings on my Rx8. Stock strings had too much peep rotation for my liking. Put Catfish on it. Noticed contact after replacing strings started with silver shims thicker on left, massive tail right. Changed to black spacers thinner on right, could notice contact during draw, but tail right tear is gone. Contact is maybe 1/4 way through draw cycle.

 

[OR Archer]

Can you post a pick of the roller guard area? Possible they’re routed incorrectly causing your issue.

 

[MT257]

Can you post a pick of the roller guard area? Possible they’re routed incorrectly causing your issue.

 

[MT257]

Can you post a pick of the roller guard area? Possible they’re routed incorrectly causing your issue.

Would taking a twist or two outta the cables help?

 

[elkbowhuntr]

Are both the top and bottom hitting or just the top? Try the silver spacers on the side that's rubbing, i.e. black on bottom, silver on top etc. Explains it better on the attachment. file:///C:/Users/elkhu/OneDrive/Desktop/Hoyt%20RX8%20Cam%20Shart.pdf

 

[MT257]

Are both the top and bottom hitting or just the top? Try the silver spacers on the side that's rubbing, i.e. black on bottom, silver on top etc. Explains it better on the attachment. file:///C:/Users/elkhu/OneDrive/Desktop/Hoyt%20RX8%20Cam%20Shart.pdf

Both are hitting

 

[elkbowhuntr]

Initially started center shot at 3/4", I have both thin grey spacers on the right of my RX8, resulted in slight left tear. Cables are close but not hitting, adjusted rest towards the riser and got a bullet hole. What is your center shot starting at?

 

[MT257]

3/4”

 

[elkbowhuntr]

I assume your BH and ATA are correct? I know based on how close my cables are to the cams with the black spacers I would have the same problem you're having now.

 

[elkbowhuntr]

Curious what your draw length is set on? Reason I ask is my cables/cams had more clearance with my draw length set shorter.

 

[MT257]

Curious what your draw length is set on? Reason I ask is my cables/cams had more clearance with my draw length set shorter.

28

 

[elkbowhuntr]

I would think your string or cables are too long. I just put a set of JBK's on mine and the BH and ATA were spot on. I increased my draw length and it through the tune all out of whack.