RRS TFCX-13 vs Ascend-14

[B_Reynolds_AK]

I just received the new Really Right Stuff TFCX-13 tripod to compare to my Ascend-14 Compact/Platform.

I think that RRS could have done a bit more to develop a truly lightweight yet capable tripod.
It is significantly longer than the Ascend and also has beefier rubber feet.

When compared directly to the Ascend in direct mounted Anvil (MA-30L), there is only a 4 oz weight difference.

The Ascend allows for more versatility in these areas:

Longer extended height.
Shorter packed length.
Center column in 2 configurations.
1/4” micro head compatibility (RRS BC-18)

I’m going to send it back. If I want to reduce more weight, I’ll remove the lower leg sections of the Ascend and cap them off.

See below for following weights:

Ascend-14 (no center column)- 2 lbs 6 oz
W/ short center column: 2 lbs 10 oz
W/ long center column: 3 lbs
W/direct mount MA-30L: 3 lbs 2 oz
1 lower leg section of Ascend: 3 oz (x3 9 oz)

TFCX-13: 2 lbs 3 oz
W/ MA-30L: 2 lbs 14.5 oz

 

[willfrye027]

I just received the new Really Right Stuff TFCX-13 tripod to compare to my Ascend-14 Compact/Platform.

I think that RRS could have done a bit more to develop a truly lightweight yet capable tripod.
It is significantly longer than the Ascend and also has beefier rubber feet.

When compared directly to the Ascend in direct mounted Anvil (MA-30L), there is only a 4 oz weight difference.

The Ascend allows for more versatility in these areas:

Longer extended height.
Shorter packed length.
Center column in 2 configurations.
1/4” micro head compatibility (RRS BC-18)

I’m going to send it back. If I want to reduce more weight, I’ll remove the lower leg sections of the Ascend and cap them off.

See below for following weights:

Ascend-14 (no center column)- 2 lbs 6 oz
W/ short center column: 2 lbs 10 oz
W/ long center column: 3 lbs
W/direct mount MA-30L: 3 lbs 2 oz
1 lower leg section of Ascend: 3 oz (x3 9 oz)

TFCX-13: 2 lbs 3 oz
W/ MA-30L: 2 lbs 14.5 oz


View attachment 727887

Thanks for posting this. I’ve been happy with my ascend..I need to play with removing a leg section and using just the short center column. Would love to see what you come up with end caps

 

[B_Reynolds_AK]

Thanks for posting this. I’ve been happy with my ascend..I need to play with removing a leg section and using just the short center column. Would love to see what you come up with end caps

I purchased rubber chair end caps off of Amazon for another tripod a couple years ago. I plan to measure the Ascend and do the same again. The end caps are not super light, but the net overall savings should atleast be a quarter lb., which is the difference between these two tripods.

The height of the Ascend without the lower legs is like 3 inches lower than the full length TFCX, but it’s not a big deal as neither would be standing height in that configuration anyhow.

 

[StopMakingSense]

@B_Reynolds_AK could you take a picture of both of the direct mount options for the Ascend and TFCX-13?

I was interested in this setup but now I'm thinking through which one I want.

 

[Kurts86]

My biggest question would be how much shooting stability is improved from the Ascend-14 to the TFCX?

 

[B_Reynolds_AK]

My biggest question would be how much shooting stability is improved from the Ascend-14 to the TFCX?

Zero. It’s the same tripod minus the lower leg sections of the Ascend. I find the Ascend a fantastic tripod to shoot from, from prone to kneeling, out to 800+ yards.

 

[B_Reynolds_AK]

@B_Reynolds_AK could you take a picture of both of the direct mount options for the Ascend and TFCX-13?

I was interested in this setup but now I'm thinking through which one I want.

On the Ascend you remove the center column and use a bolt and washer to attach the Anvil. Both are equally as secure.

 

[B_Reynolds_AK]

Ascend-14 with lower legs removed and capped off with 1” chair end caps from Amazon.

With short center column and the RRS BC-18, it comes in at 2 lbs 8 oz.

Direct mounted MA-30L (Anvil clone) and it weighs 2 lbs 12 oz.

 

[Sadler]

Ascend-14 with lower legs removed and capped off with 1” chair end caps from Amazon.

With short center column and the RRS BC-18, it comes in at 2 lbs 8 oz.

Direct mounted MA-30L (Anvil clone) and it weighs 2 lbs 12 oz.

View attachment 731353

That looks way cleaner than my electrical tape and rubber caps. Do those stay on by a friction fit or did you have to use some sort of adhesive?

 

[B_Reynolds_AK]

That looks way cleaner than my electrical tape and rubber caps. Do those stay on by a friction fit or did you have to use some sort of adhesive?

Friction fit. They can be pulled off, but not very easily. I may wrap some electrical tape directly around the threads underneath, so the caps fit a bit more snug though.

 

[Sadler]

That’s what I did. I’ll post a pic of my ghetto looking $1300 tripod when I get home