RokStok

Put a foam pad on this Rokstok and checked zero with a 10-shot group. This was a 3/16 cheek eez pad. In hindsight, I think 1/8 would have been better. New barrel still seems like a shooter!

View attachment 1062046

I have one of these too, its taking some deep scratches.

It's smoother than the one UM sells. My UM one has taken damage too; night hunting.

I got the 1/4" w/ medium rings and its workable but probably a little too thick.

IMG_0130.jpeg
 
Alright need to remove the recoil pad and install a wood spacer I made for my previous stock. Screws are out but there was a flat black plate on my first stock, not on this one and the pad is stuck on there.

Suggestions how to get this off?
 
Alright need to remove the recoil pad and install a wood spacer I made for my previous stock. Screws are out but there was a flat black plate on my first stock, not on this one and the pad is stuck on there.

Suggestions how to get this off?
Run a utility knife between the carbon and plastic and pry gently. Stockys runs a little (or a lot) of glue around the screw holes. I ran the knife around a few times just cutting any glue that had oozed out, then slowly pried further and further alternating sides and angles.
 
Maybe I have a neanderthal facial structure but I finally settled on the correct ring choice for my stock. Ended up having to go with the UM highs to get my sight picture lined up naturally. Don't be afraid to try it. I see most people okay with the mediums but that didn't work for me. It's much less annoying now.
 
Maybe I have a neanderthal facial structure but I finally settled on the correct ring choice for my stock. Ended up having to go with the UM highs to get my sight picture lined up naturally. Don't be afraid to try it. I see most people okay with the mediums but that didn't work for me. It's much less annoying now.
I can confirm the Neanderthal structure :ROFLMAO:
 
Back
Top