RokStok

[Antares]

Put a foam pad on this Rokstok and checked zero with a 10-shot group. New barrel still seems like a shooter! Adj 0.1 right.

 

[Nine Banger]

Put a foam pad on this Rokstok and checked zero with a 10-shot group. This was a 3/16 cheek eez pad. In hindsight, I think 1/8 would have been better. New barrel still seems like a shooter!

View attachment 1062046

I have one of these too, its taking some deep scratches.

It's smoother than the one UM sells. My UM one has taken damage too; night hunting.

I got the 1/4" w/ medium rings and its workable but probably a little too thick.

 

[doverpack12]

Alright need to remove the recoil pad and install a wood spacer I made for my previous stock. Screws are out but there was a flat black plate on my first stock, not on this one and the pad is stuck on there.

Suggestions how to get this off?

 

[doverpack12]

I have one of these too, its taking some deep scratches.

It's smoother than the one UM sells. My UM one has taken damage too; night hunting.

I got the 1/4" w/ medium rings and its workable but probably a little too thick.

View attachment 1062059

Where is the thicker adhesive foam from? I may need more height than the leather cheek

 

[Nine Banger]

Where is the thicker adhesive foam from? I may need more height than the leather cheek

Amazon.com

 

[BigMiss]

Alright need to remove the recoil pad and install a wood spacer I made for my previous stock. Screws are out but there was a flat black plate on my first stock, not on this one and the pad is stuck on there.

Suggestions how to get this off?

Run a utility knife between the carbon and plastic and pry gently. Stockys runs a little (or a lot) of glue around the screw holes. I ran the knife around a few times just cutting any glue that had oozed out, then slowly pried further and further alternating sides and angles.

 

[WeiserBucks]

Anyone want an ARCA rail? Cover shipping and it's yours.

Edit, it's spoken for.