RokStok

[swavescatter]

Since the initial batch of RS Lites were heavier than advertised, it makes me wonder if @Stockys has a new process/material, etc

The continued inability to efficiently produce consistent stocks makes me wonder if they have ANY process...

 

[bpitcher]

Update:
Ordered 9/9/25

"Order Placed with Stocky's" 10/30/25
"Shipped from Stocky's" 2/20/26
"Received from Stocky's 2/27/26

On my doorstep 3/12/26 (184 days)

Upon inspection, it seemed that the spacers were a little loose. As I went to remove a spacer, I discovered that the anchors were pulled out from the stock. Additionally, the spacers are stuck together. I was able to pry the butt pad off on one side but didn't go any further as to not damage anything.

Sent UM an email yesterday. I'm sure they'll take care of this, but it is pretty crappy wait past their advertised lead times and then receive something that is not usable.

 

[Schmo]

Update:
Ordered 9/9/25

"Order Placed with Stocky's" 10/30/25
"Shipped from Stocky's" 2/20/26
"Received from Stocky's 2/27/26

On my doorstep 3/12/26 (184 days)

Upon inspection, it seemed that the spacers were a little loose. As I went to remove a spacer, I discovered that the anchors were pulled out from the stock. Additionally, the spacers are stuck together. I was able to pry the butt pad off on one side but didn't go any further as to not damage anything.

Sent UM an email yesterday. I'm sure they'll take care of this, but it is pretty crappy wait past their advertised lead times and then receive something that is not usable.

View attachment 1036931

View attachment 1036932

I’m getting close to asking them to cancel my order. Past 120 days, shipped from Stocky’s a week ago yesterday, and I figure it should have already arrived at UM. Hoping it didn’t have a defect and needed to be sent back.

 

[waspocrew]

Stockys reached out to me yesterday- mine should be shipping back to UM again. Curious to see how long it’ll take to get in hand. I’m skipping cerakote so they can just drill a few holes, attach a rail and send to me.

 

[atmat]

Update:
Ordered 9/9/25

"Order Placed with Stocky's" 10/30/25
"Shipped from Stocky's" 2/20/26
"Received from Stocky's 2/27/26

On my doorstep 3/12/26 (184 days)

Upon inspection, it seemed that the spacers were a little loose. As I went to remove a spacer, I discovered that the anchors were pulled out from the stock. Additionally, the spacers are stuck together. I was able to pry the butt pad off on one side but didn't go any further as to not damage anything.

Sent UM an email yesterday. I'm sure they'll take care of this, but it is pretty crappy wait past their advertised lead times and then receive something that is not usable.

View attachment 1036931

View attachment 1036932

Your spacers may not be stuck together. The have a nub and a recess that fit together so they don’t slide off on another. You can’t really unstick them until you unscrew the pad enough.