RokStok

[BAKPAKR]

View attachment 982162

View attachment 982163

You really need to stick with stainless steel - maybe even nitrided and cerakoted SS.

 

[passinggas33]

Here is a picatinny folding mechanism from Samson mfg.

The way I see it, you
1. lay out the stock, and decide where you want to make the cut. Looks like manners decided right before the pistol grip was their spot
2. Epoxy a 1913 rail with anchor screws into the forward section
3. Epoxy a female-threaded insert into the rear section.
4. Attach the Samson folding mechanism at the picatinny forward section. Then bolt the butt stock section to the rear folding mechanism with a cross bolt.

SAMSON PICATINNY SIDE FOLDING ADAPTER, BLACK

SAMSON, 1913 Picatinny Side Folding Adapter, Black, 850059556269, SAM-04-06114-01, RTG Parts

www.robertrtg.com

View attachment 984248

I’ve thought about this same idea. It would definitely add some length and my fear would be it would increase trigger reach, which was part of the reason the Rokstock was built in the first place. I was trying to figure out a way to recess it in the stock to not interfere with that. That’s why the manners design is ideal.

 

[Formidilosus]

You really need to stick with stainless steel - maybe even nitrided and cerakoted SS.

Nah. A bit of a wipe down and it’s good as new….



‘Ish

 

[Speaks]

Set up another one today with a bit longer LOP and medium rings. Not sure I have any preference between 14 and 14.25 for LOP will have to get some real shooting time in but short version is that it does not seem to matter. But I did not like the medium rings and swapped them back to lows. Mediums would have been useable but with lows I am just right in the eye box.

 

[Chris Bull Whacker]

Looking to purchase a Rokstok for my Howa Mini 6 arc.
Would anyone happen to know if the mini action fits into the Howa Short action inlet?


Sent from my iPhone using Tapatalk

 

[Te Hopo]

Looking to purchase a Rokstok for my Howa Mini 6 arc.
Would anyone happen to know if the mini action fits into the Howa Short action inlet?


Sent from my iPhone using Tapatalk

The Mini and Short action are different inlets and screw spacing

 

[The Guide]

Looking to purchase a Rokstok for my Howa Mini 6 arc.
Would anyone happen to know if the mini action fits into the Howa Short action inlet?


Sent from my iPhone using Tapatalk

No, it will not. Currently there is no Rokstok for the Howa Mini Action. They have stated the Rokstok Lite will be available for the Howa Mini Action. You may be able to get a Wooden Rokstok Lite built for the Howa Mini Action but they are expensive.

Jay

 

[Chris Bull Whacker]

No, it will not. Currently there is no Rokstok for the Howa Mini Action. They have stated the Rokstok Lite will be available for the Howa Mini Action. You may be able to get a Wooden Rokstok Lite built for the Howa Mini Action but they are expensive.

Jay

Okay thanks! I’ll wait for the Rokstok Lite


Sent from my iPhone using Tapatalk

 

[TimberHunter]

Are you guys seeing the 120 days lead time being pretty accurate?

 

[HuntHarder]

My last order was put in 9/11/25. Nothing yet, hoping they hit the 120 day target.

 

[Brap01]

Okay thanks! I’ll wait for the Rokstok Lite


Sent from my iPhone using Tapatalk

RokStock lite on a how mini 1500 in 6 ARC with a 16" barrel... sounds amazing. Time to start digging for info on that rifle!

 

[IrkedCitizen]

Are you guys seeing the 120 days lead time being pretty accurate?

My last one took 78 days to complete. Granted it's a R700 and not a Tikka so less demand means quicker turnaround. It seems they are not as backlogged and have removed the "inventory remaining" and are just keeping the orders open.

 

[BilboBaggins]

Ordering a Rokstok and I’m kind of a newb to carbon fiber stocks, can someone answer some questions I have?
1. Is it ok to get a proof contour stock if my rifle has a D18 (heavy fluted) contour? Will the gap be too big or is that ok? I may swap a carbon fiber barrel in the future.
2. What do people usually prefer for sling mounting? A qd on the rear/side or just a normal sling stud? It looks like the arca rail on the front has a qd socket already?
3. If I have no bipods at this point should I get the arca/pic combo or just pick one? Which is best?

Sorry if these are dumb questions. I tried googling and couldn’t find much.

 

[Tullis94]

Can rokstoks be ordered right now? I though they were only opening the orders for a set amout every so often, but It is letting me add one to my cart on the website.

 

[Dave_S]

Ordering a Rokstok and I’m kind of a newb to carbon fiber stocks, can someone answer some questions I have?
1. Is it ok to get a proof contour stock if my rifle has a D18 (heavy fluted) contour? Will the gap be too big or is that ok? I may swap a carbon fiber barrel in the future.
2. What do people usually prefer for sling mounting? A qd on the rear/side or just a normal sling stud? It looks like the arca rail on the front has a qd socket already?
3. If I have no bipods at this point should I get the arca/pic combo or just pick one? Which is best?

Sorry if these are dumb questions. I tried googling and couldn’t find much.

1. Yes, under almost all circumstances you should go ahead and order the sendero barrel channel.

2. I don't usually bother with a sling. I either carry in hand or attached to my pack with SG rifle carrier. I've also found that the qd on one of my stocks is installed in a way that prevents a sling from engaging properly. Hasn't been a problem for me so I never bothered to contact UM about it.

3. My advice would be to decide what sort of bipod you'd like to purchase and go from there. Personally, I wouldn't plan on using a rail that far forward for tripod mounting, so it's really just whatever you want to attach.

 

[WCT3]

Ordering a Rokstok and I’m kind of a newb to carbon fiber stocks, can someone answer some questions I have?
1. Is it ok to get a proof contour stock if my rifle has a D18 (heavy fluted) contour? Will the gap be too big or is that ok? I may swap a carbon fiber barrel in the future.

I would get the proof contour no matter what profile you have unless you really care about the aesthetics. You really can't have too much gap from a functional standpoint (more dead cats the better).

2. What do people usually prefer for sling mounting? A qd on the rear/side or just a normal sling stud? It looks like the arca rail on the front has a qd socket already?

Imo qd is the best way to mount a sling. I didn't get flush cups on mine and I regret it. I think if you order with a rail it comes with both cups already installed but I'm not 100% on that.

3. If I have no bipods at this point should I get the arca/pic combo or just pick one? Which is best?

Pic should cover almost every bipod out there so I'd just get that unless you want to shoot off of a tripod at the end of the stock

 

[IrkedCitizen]

Can rokstoks be ordered right now? I though they were only opening the orders for a set amout every so often, but It is letting me add one to my cart on the website.

They removed the inventory cap as I believe the backlog has been alleviated. So it's open for orders until they get overwhelmed again and close it down.