RokStok

Just came in. Could run socket and sandpaper down the barrel channel. Nothing is touching though. Pleasantly surprised for a aftermarket stock. The ascension 3d printed mags feed like butter and lock up fine with the factory bottom plastic. This gun came out of a ctr stock and bm that I swapped it to shortly after getting it 7-8 years ago.
 

Attachments

  • IMG_7437.jpeg
    IMG_7437.jpeg
    632.4 KB · Views: 101
If you need just a little LOP added like I did (to get the Maven to work with recoil pins) this Pachmayer pad is pretty close and if you're not after perfect the grinding is pretty easy. I've been putting it off and I'm sitting here waiting for a kid to show up to go hunting tonight and I knocked it out in a few minutes.

Observe the slight lip that isn't covered with the factory screw holes.

 

Attachments

  • IMG_5464.jpeg
    IMG_5464.jpeg
    407.1 KB · Views: 27
  • IMG_5463.jpeg
    IMG_5463.jpeg
    395.1 KB · Views: 24
  • IMG_5460.jpeg
    IMG_5460.jpeg
    425.4 KB · Views: 23
  • IMG_5459.jpeg
    IMG_5459.jpeg
    372.8 KB · Views: 25
  • IMG_5458.jpeg
    IMG_5458.jpeg
    358 KB · Views: 26
  • IMG_5457.jpeg
    IMG_5457.jpeg
    399.1 KB · Views: 26
This one fits better.


Harder to work with and produces an inferior product to the Pachmayr tho.
 

Attachments

  • IMG_5471.jpeg
    IMG_5471.jpeg
    469.5 KB · Views: 26
  • IMG_5470.jpeg
    IMG_5470.jpeg
    503.5 KB · Views: 23
  • IMG_5469.jpeg
    IMG_5469.jpeg
    429.2 KB · Views: 24
  • IMG_5468.jpeg
    IMG_5468.jpeg
    457.7 KB · Views: 23
  • IMG_5467.jpeg
    IMG_5467.jpeg
    357.2 KB · Views: 25
  • IMG_5466.jpeg
    IMG_5466.jpeg
    393.1 KB · Views: 25
What's everyone using for sling attachment in the flush cups?

Seems like Grovtec is the go-to, but I don't see how I'd swap the push lock fittings on my quake claw slings for the QD fittings. Would have to push the strap through the rubber portion as the "long" end (bottom on the attached image) of the strap is sewn together after the fitting. Not sure I can get the strap back through the rubber if I pull it out.

1759463941376.png
 
What's everyone using for sling attachment in the flush cups?

Seems like Grovtec is the go-to, but I don't see how I'd swap the push lock fittings on my quake claw slings for the QD fittings. Would have to push the strap through the rubber portion as the "long" end (bottom on the attached image) of the strap is sewn together after the fitting. Not sure I can get the strap back through the rubber if I pull it out.

View attachment 944774
They make a qd flush cup version
 
I'm not sure what you mean by that. A sling?

I want to keep my quake claw slings, but they have the push fitting pictured. So I need to swap the fittings on the sling.
gotch ya I didn’t realize you had the sling…. I was saying they make that sling with the correct qd attachments.
 

Attachments

  • IMG_5841.jpeg
    IMG_5841.jpeg
    137.5 KB · Views: 12
What's everyone using for sling attachment in the flush cups?

Seems like Grovtec is the go-to, but I don't see how I'd swap the push lock fittings on my quake claw slings for the QD fittings. Would have to push the strap through the rubber portion as the "long" end (bottom on the attached image) of the strap is sewn together after the fitting. Not sure I can get the strap back through the rubber if I pull it out.

View attachment 944774
I have a pile of those Quake Claw Slings and ran into the same problem. I didn't want to use my SAP Positional Sling and poached my Grov Tec QD sling swivels off of it and put them on my Wilderness Langlois Rhodesian Sling (a little simpler and less bulky), as the standard sling swivels were not sewn in.
 
What's everyone using for sling attachment in the flush cups?

Seems like Grovtec is the go-to, but I don't see how I'd swap the push lock fittings on my quake claw slings for the QD fittings. Would have to push the strap through the rubber portion as the "long" end (bottom on the attached image) of the strap is sewn together after the fitting. Not sure I can get the strap back through the rubber if I pull it out.

View attachment 944774
 
Back
Top