RokStok

[The Harbor Master]

If you guys are able to resume sales February-ish, do you anticipate the wait for new orders to be similar? In the 8-12mo range? I'm champing at the bit to get a non-railed!

Also, thank you for taking the time to update.

 

[The Guide]

If you guys are able to resume sales February-ish, do you anticipate the wait for new orders to be similar? In the 8-12mo range? I'm champing at the bit to get a non-railed!

Also, thank you for taking the time to update.

It has been previously stated that once orders are caught up you will only be able to buy what is in-stock. The only way to guarantee you will get one in a specific style is through a custom rifle build. That may have changed.

Jay

 

[Kronos]

It has been previously stated that once orders are caught up you will only be able to buy what is in-stock. The only way to guarantee you will get one in a specific style is through a custom rifle build. That may have changed.

Jay

Does that mean only certain colors too?

 

[The Guide]

Does that mean only certain colors too?

Colors can chosen at time of order and aren't the bottleneck since it is done in-house at UM. There will be some ready to ship options I believe but some will be able to have in-house customizable options.

Jay

 

[The Harbor Master]

Thanks, I'll keep monitoring. Can't wait.

 

[magnum]

The Rokstok Lite is currently being prototyped by @Formidilosus and Mike Maxwell of Alpine Rifles, the official producer of the Wood Rokstok. Features include: featherlight, negative comb, shortened forend, possibly railed and non-railed versions, railed version will have arca molded in at DBM and small pic at forend position, same short trigger pull, Howa Mini, Tikka, REM 700 Short, and potentially Kimber 84 and Ruger 10/22. We plan to be producing these stocks prior to opening up any orders, realistically 2nd/3rd quarter for retail orders.

I have been holding out for a lite version inletted for Savage short action. Does that fall within the same category as any of your listed offerings? If not, will Savage ever be in the cards for Rokstok Lite?

 

[jdoyle243]

Got my 700 long action, I like it better than expected.
The action dropped right in, the bottom metal needed some very minor fitting. I also used a washer because the front action screw was a touch long.

First shots today went well. First impact was the low one and surely some mechanical stress. The next 5 were the group. I was also shooting pretty quick because it was getting dark.

I'll get better pictures of the relief needed for the Hawkins Hunter bottom metal, but I just have the one. Some relief needed on the front portion of the inlet near the front action screw and then of course for the magazine release adjustment.

Will check the ability to spot shots in the next couple days. I have an 8" pplate at 380 that I shoot all the time. I can't spot impacts on it currently, but I know exactly how far the plate swings back when I do get back on target so that will be a good comparison because I shoot that target a lot.

You do anything specific to get your gunwerks bipod to hold still on that grooved pic mount?

 

[Forrest.billy]

You do anything specific to get your gunwerks bipod to hold still on that grooved pic mount?

Tighten the little allen screw on the side that adjusts the tension for when attached to your pic rail. You end up just increasing the clamping force on the sides of the pic rail.

 

[roosiebull]

Thank you for protecting that deer's identity. (Did the lack of comments mean that people missed this??)

This takes blacking out details on Rokslide to a level that I don't think even @Formidilosus has reached before.

Now we just need @fwafwow to turn this into a meme.

I would, but recently just flew in from an assignment.

I completely missed that

 

[fisherman983]

OFFICIAL ROKSTOK UPDATE!

@Ryan Avery @Formidilosus @Salmon River Solutions @Stockys

I am currently in Florida with the wonderful @Stockys crew dialing in some inlets and helping box up Rokstoks. Lots of them on their way to us right now.

All Green Rokstoks will be in customers hands by end of January. I built in a little time there, Jessica says all greens done here in production by end of year, 10 days travel time to UM, and then off to you Fedex 2 day express.

All open orders for REM 700 and Savage inlets will be filled in the same time frame.

Jessica and crew have been running our railed Tikka molds hard and there must be 100 here in the shop at various stages of completion. We hope to have all orders done very soon so we can re open orders. This is the most popular configuration of Rokstok so thank you for being patient with us.

Winchester Model 70 Rokstok mold will be ready to produce textured stocks around end of January.

SRS is running the all new, highly requested, trinity rails that should be done this weekend. Then off to Anodize for 4 weeks. I will get them up on the website in the meantime. This rail will bolt right in to the existing Spartan/ Pic rail position. without modification. If you did not get the Spartan rail originally you will need to drill a 3/4" hole to accommodate the rail but the screw holes should line up fine. You can send the stock back in to us to be converted if you don't want to deal with it. The new trinity rail will be standard on the Rokstok once orders re open early next year.

The Rokstok Lite is currently being prototyped by @Formidilosus and Mike Maxwell of Alpine Rifles, the official producer of the Wood Rokstok. Features include: featherlight, negative comb, shortened forend, possibly railed and non-railed versions, railed version will have arca molded in at DBM and small pic at forend position, same short trigger pull, Howa Mini, Tikka, REM 700 Short, and potentially Kimber 84 and Ruger 10/22. We plan to be producing these stocks prior to opening up any orders, realistically 2nd/3rd quarter for retail orders.

Invoice numbers that have just left Stockys and headed to UM, remember that it is 10 days travel time to get to UM: 177827, 178050, 178733, 182578, 182655, 182738, 183084, 183218, 184137, 184617, 184753, 185677, 186622, 187353, 187557, 187773, 188081, 188701 (4 stocks shipped), 181185 (3 stocks shipped), 193474, Casey Streepy, 194314, 194701, 194899, 195274, 195496, 195608, 193697, 193996, 195467.

There are 18 more railed Tikka's being cut as we speak. We will also get another batch of available rail-less Tikka Rokstoks up soon.

Thank you for all of your support of UM, S2H, SRS, and Stockys as we make this final push!!
I will be online to answer questions until 2PM EST 19DEC2024.

Jake Mushaney
Unknown Munitions
Shoot2Hunt
Unknown Suppressors

Any chance you'll offer an inlet for a seekins havak ph2? Being as how you sell them in your store? I don't think they fit a r700 inlet do they?

Sent from my SM-S928U using Tapatalk

 

[roosiebull]

Any chance you could show a picture? I'm going to be ordering a second as soon as they re open sales and it will have a tikka profile barrel. Been going back and forth between the tikka contour or 3b as I'd like a decent gap without being a complete hotdog down a hallway situation

Here is another example, it’s far from hotdog in a hallway, and will just get a sendero for the next one. It has plenty of clearance, but i wouldn’t want less. This is a rainforest rifle and of course had zero issues with the gap getting anything in it, but I haven’t had issues with the sendero channel with factory barrels either

For those who are concerned about brush getting hung up in there, you can wrap your spare tape for your barrel right ahead of the forend (like 1/4” ahead) and that kills 2 birds with one stone

 

[HighUintas]

Here is another example, it’s far from hotdog in a hallway, and will just get a sendero for the next one. It has plenty of clearance, but i wouldn’t want less. This is a rainforest rifle and of course had zero issues with the gap getting anything in it, but I haven’t had issues with the sendero channel with factory barrels either

For those who are concerned about brush getting hung up in there, you can wrap your spare tape for your barrel right ahead of the forend (like 1/4” ahead) and that kills 2 birds with one stone

Good idea!

 

[lak2004]

Was gonna sell my Win model 70 but between a rokstock coming soon and the dbm, ill hold it and make it a 6prc or 6um!

 

[tak]

You do anything specific to get your gunwerks bipod to hold still on that grooved pic mount?

I didn't, fit pretty tight, didn't move with hand pressure. I've only shot it 9 times though. I wasn't really planning on using that bipod, but you can adjust the tension as stated above.

 

[Billy Goat]

Happy Birthday!

To my dog, he was born December 21.

Seems like something else happened then too, dunno.

 

[BCsteve]

Here is another example, it’s far from hotdog in a hallway, and will just get a sendero for the next one. It has plenty of clearance, but i wouldn’t want less. This is a rainforest rifle and of course had zero issues with the gap getting anything in it, but I haven’t had issues with the sendero channel with factory barrels either

For those who are concerned about brush getting hung up in there, you can wrap your spare tape for your barrel right ahead of the forend (like 1/4” ahead) and that kills 2 birds with one stone

So this a factory T3X Lite barrel in a 3B inlet?

 

[roosiebull]

So this a factory T3X Lite barrel in a 3B inlet?

Yep