RokStok

[NSI]

Seems like recessed to be flush with stock, full length, or no rail would be preferable to a little stubby bump in front of the mag.

That’s my opinion.

-J

 

[deerhunter628]

Got a photo? i think I have one laying around. I shot off the front arca and it's ok, but in front of the mag well is better. Had it that way on the factory tikka stock and loved it.

 

[Grizzle]

Haven't received mine yet but they are putting a spartan gs adapter in front of my mag well. I use the spartan arca adapter on my Tripod head and will be able to clip into either the spartan/ Pic on forend or in the flush gs adapter. Might not be everyone's cup of tea but works for me and doesn't leave a plate to fight

 

[lak2004]

Haven't received mine yet but they are putting a spartan gs adapter in front of my mag well. I use the spartan arca adapter on my Tripod head and will be able to clip into either the spartan/ Pic on forend or in the flush gs adapter. Might not be everyone's cup of tea but works for me and doesn't leave a plate to fight

Are you using glass (bino or spotter) on your tripod as well?

 

[Grizzle]

Are you using glass (bino or spotter) on your tripod as well?

Yes both my Bino and Spotter are set up with spartan plugs so they pop on as quick as rifle onto Tripod or bipod. By using the arca to spartan adapter I can use all three on either my ball head if primarily shooting or Fluid head if primarily glassing

 

[JDBAK]

Seems like recessed to be flush with stock, full length, or no rail would be preferable to a little stubby bump in front of the mag.

I’ve found that being just forward of the balance point works fine for carrying the gun.

I haven’t shot my CTR 260 enough off of hard improvised positions like trees and poles and such to comment. But with soft stuff it’s done great. You’d think with the stubby 2.5” plate it would suck off a bag, but damned if that gun just doesn’t stack rounds to POA/POI. Off a tripod, pack, roller up coat, whatever. With Leupold MK5 no less.

A couple weeks ago I shot 5 shots at a black 1” plaster on white paper at 100 yds after a rough hunt. Couldn’t see hits. Got close and found 5 shots in like .6” well inside the paster.
I keep waiting for equipment to fail but in the meantime the setup just shoots. Can’t remember how long since any adjustment was made, or that it put 5 shots over an inch. 10 shots in maybe 1.1”?

 

[JDBAK]

I’ve found that being just forward of the balance point works fine for carrying the gun.

I haven’t shot my CTR 260 enough off of hard improvised positions like trees and poles and such to comment. But with soft stuff it’s done great. You’d think with the stubby 2.5” plate it would suck off a bag, but damned if that gun just doesn’t stack rounds to POA/POI. Off a tripod, pack, roller up coat, whatever. With Leupold MK5 no less.

A couple weeks ago I shot 5 shots at a black 1” plaster on white paper at 100 yds after a rough hunt. Couldn’t see hits. Got close and found 5 shots in like .6” well inside the paster.
I keep waiting for equipment to fail but in the meantime the setup just shoots. Can’t remember how long since any adjustment was made, or that it put 5 shots over an inch. 10 shots in maybe 1.1”?

BTW the above is not a recommendation for this snagging arca plate set up.

I have a light Tikka 300WSM (skinny McGowan barrel), factory stock, no arca plate. It shoots reasonably well (10 shots in 1.3-1.7 MOA ish), but it's a lot of work. It's very sensitive to grip pressure.
I would expect great variability with an arca plate snagging a backpack, etc.

I suspect the greater weight and lower recoil of the 260/CTR just makes it unreasonably forgiving. And probably there's some luck involved with that particular barrel and Mk 5 scope.

 

[brockel]

Had guns out this morning and my 10 year old got behind my rokstock and she said “wow dad that is so much easier to get behind the scope”. Guess I’ll be getting another one

 

[bullmtn]

Had guns out this morning and my 10 year old got behind my rokstock and she said “wow dad that is so much easier to get behind the scope”. Guess I’ll be getting another one

I wouldn’t, too expensive.

Plus 11 years would be a big difference between siblings.

 

[TxLite]

Without scrolling through the entire thread, where are we at currently on bare railed Tikkas? Make it to mid-January orders yet?

 

[Grizzle]

Without scrolling through the entire thread, where are we at currently on bare railed Tikkas? Make it to mid-January orders yet?

I'm middle of jan and mines in paint

 

[IrkedCitizen]

Without scrolling through the entire thread, where are we at currently on bare railed Tikkas? Make it to mid-January orders yet?

Last we heard they are/were producing the limited edition green and black camo. So until those are finished they aren't making standard carbon

 

[TxLite]

Last we heard they are/were producing the limited edition green and black camo. So until those are finished they aren't making standard carbon

Ok so my early June order is right around the corner then

 

[DangerRanger]

Rokstok performed in the kids 4H food plot project this morning.

6.5 PRC
130gr TMK
2762fps impact velocity

View attachment 795338

Happy Thanksgiving, everyone!

How fast is that 130 going at the muzzle? I’m kinda considering getting a 6.5 prc barrel for elk season next year. My 16” creed only pushes them 2600

 

[Nine Banger]

How fast is that 130 going at the muzzle? I’m kinda considering getting a 6.5 prc barrel for elk season next year. My 16” creed only pushes them 2600

2848 fps

18” barrel.

 

[DangerRanger]

2848 fps

18” barrel.

Hmm so ~200 fps for the powder and 50 for the barrel length.

Not sure if I wanna pull that trigger for speed to recoil

Looks like it works well, nice kit