RokStok

[Holocene]

T1x compatibility was brought up early (back on page 3-4), but I haven't seen any comments since (could have missed it).

Will relief cuts on the T3x Rokstock allow folks to swap in a T1x? Or should we expect to do a little filing for fit?

I have a T3x now, haven't looked under the hood on a T1x yet, but am thinking of swapping out my 10/22 and using the T1x as a copy of my big game rifle.

 

[HighUintas]

Pretty spot on and I was the one who spoke with you!

Also to add one of the owner Don’s hobbies is building and launching rockets 50,000 ft up so he has extensive composite experience as well.

Sounds like me and Don need to hang out.

 

[Colby]

Sorry if I missed it, is 13.5” going to be the shortest LOP?

 

[joshr]

I talked to stockys a few weeks ago regarding the acublock bedding system. One thing worth noting in our conversation was that they told me they tested the acublock against the traditional aluminum pillars and the results were impressive. They said they were able to crush the aluminum with 1 ton of pressure while they reached the maximum force they could of 8 tons on the acublock without any damage.. for anyone worried about the crush strength on the acublock I wouldn’t be. They also said that since they have moved to Florida they have taken advantage of the the marine industry which is how they were able to come up with the with material that makes the acublock. I also asked them what the performance of the bedding system was when it comes to the recoil lug and if it will deform over time and they said that they have not seen an issue. They also told me that though it’s not recommended, a gentleman put a 375 sheytac in an acublock and the first 100 rounds did not have any affect on it.

Stockys, correct me if I am wrong on any of this

It is nice to see that they are trying to find the breaking point of their system. Not finding the breaking point at 800% over the previous common practice is icing on the cake.


Sent from my iPhone using Tapatalk

Does that mean 33xc etc are not recommended? @Stockys

 

[ljalberta]

Sorry if I missed it, is 13.5” going to be the shortest LOP?

For the initial run. They’ve said they’re working on shorter LOP options for future availability.

 

[fwafwow]

Is there a custom option that could be inspired by this?

 

[TimberHunter]

Is there a custom option that could be inspired by this?
View attachment 641911

No… please say no Unknown Munitions


Sent from my iPhone using Tapatalk

 

[IrkedCitizen]

You can pay for whatever paint scheme you want

 

[Marbles]

Is there a custom option that could be inspired by this?
View attachment 641911

UM should release an energy drink, they can put Form and Ryan's names on it, color it green, then call it something like TMK RokBlood. Then they can talk about it on the podcast.

 

[roosiebull]

UM should release an energy drink, they can put Form and Ryan's names on it, color it green, then call it something like TMK RokBlood. Then they can talk about it on the podcast.

Or like a hard seltzer that they could call “rok hard”

 

[h2so4]

Or like a hard seltzer that they could call “rok hard”

I’m pretty sure “rok hard” is already in use on a different type of product. Although, likely often times combined with hard seltzers.

 

[blick]

What will the bottom inlet be on the rem 700? Will stockys 1" recoil pad be compatible?

 

[JCMCUBIC]

I think Form mentioned it in regards to the bedding, but the action type, specifically the recoil lug implementation, plays a big part in bedding. This is discussing the rearward/forward movement of the action in the stock - not giving any consideration to the compression of stock materials mentioned earlier or the geometry of the action.

With a design that uses an external recoil lug, bedding it tight to the back of the lug helps reduce rearward/forward movement and strain on the action screws. IMHO, any external lug action should at least have the rear of the recoil lug bedded.

With a design that uses an internal lug recess, like Tikka or Seekins Element, the need for bedding to minimize rearward/forward movement is minimized by the way the action is pulled down into the lug attached to the stock.

 

[6.5x284]

What will the bottom inlet be on the rem 700? Will stockys 1" recoil pad be compatible?

Curious also. Didn't see the bottom metal inlet options in the photo.

 

[walk2112]

Curious also. Didn't see the bottom metal inlet options in the photo.

Color me curious here as well, asking for a friend... CTR bottom metal inlet at this stage in game or is that a future proposition? I'm in either way, just adding up the parts and pieces in my head.

 

[Unknown Munitions]

Sorry if I missed it, is 13.5” going to be the shortest LOP?

Yes, as of now.

 

[Unknown Munitions]

Is there a custom option that could be inspired by this?
View attachment 641911

Sure can, pick pattern when checking out and email us your sample picture referencing your order number.

 

[Unknown Munitions]

What will the bottom inlet be on the rem 700? Will stockys 1" recoil pad be compatible?

All M5 inlets on REM 700. No the 1" is not compatible but you can add a 1/2" spacer if needed.

 

[Unknown Munitions]

Color me curious here as well, asking for a friend... CTR bottom metal inlet at this stage in game or is that a future proposition? I'm in either way, just adding up the parts and pieces in my head.

Only standard T3X DBM for now. UM is also developing our own Tikka DBM and Mag with maximizing COAL at the top of the priority list.

 

[wind gypsy]

Only standard T3X DBM for now. UM is also developing our own Tikka DBM and Mag with maximizing COAL at the top of the priority list.

Iffn you guys can make a true flush fitting mag, like browning xbolt perfectly flush, even if it only held 2 rounds, i'm buyin.