RokStok

[Dobermann]

Ugh. Like an idiot, I went and looked at the gallery. Now I want a Rokstok in multicam tropic real bad! Thanks a lot, dude!

View attachment 637540

Yeah, baby!

But if I can do this 'Munti-cam' half-assed job below, pretty sure you can rock your own MultiCam Tropic paint job with some Duracoat and stencils ...

 

[Dobermann]

Form, Ryan, Jake and Jessica are going to deliver a functional design that’s functional ...

A functional design that's functional.

I'm with @PNWGATOR - nailed it!

(Although while we're all fretting about aesthetics, I am tempted to add that sponge paint jobs are lazy, ugly, and should be banned forevermore from upload ... but that would be rude.)

 

[Mike Islander]

I would also vote no logo. Gives me "offroad truck aftermarket parts" vibes. Could work smaller or with a more subtle, blended in design.

Not sure if I like the torn pattern, but another color combo might speak to me. I do like the idea of exposing the carbon fiber.

BIG GIANT +1000 FOR NO OBVIOUS LOGO!

Literally a no-go for me when buying hunting stuff, clothing, etc. Make it so good people ask what brand it is. Subtle to the point of having to hold the item to see the logo = perfect.

 

[prm]

Curious how this plays out. The steep angle on the comb will require the scope to be placed precisely for the eye relief. Won’t be wiggle room on cheek placement for a given ring height (scope centerline). Potential challenge when rings don't allow enough fore/aft movement or when eye relief changes with zoom? Scopes that change eye relief the least may work better for this. Won’t matter with my 6x.

 

[wind gypsy]

Ok Roksliders.......what are your thoughts?

This torn look would be the standard paint job and you could choose between 4 combos where the base coat of tan and black tear highlights are.

PS- This is not a Rokstok and sorry for the poor picture

View attachment 637388

That looks pretty decent to me. HCA broke me in by covering the whole damn buttstock with their bull skull logo on a build i have from them so the much smaller rokstok logo doesn't get to me. I like no logo best but its a non-issue. I'll buy without complaint with that plan.

Anything like what you do with your cerakote layer 1 patterns, multicam'ish, or what PRM posted would be ideal. I assume the standard finish is not going to be cerakote to keep cost down?

 

[BjornF16]

Some of the posts on this thread are unreal to me. Damn.

The stock is in process.

Form, Ryan, Jake and Jessica are going to deliver a functional design that’s functional, exceptional quality and affordable.

That said…gonna be SO good!

Can’t everyone see this for what it is?
Rokslide, Ryan and Form are all industry plants.

Rokslide is owned by Tikka.
Ryan owns SWFA.
And Form is an ex-SpecOps guy to be their salesman.

Rokslide was created over a decade ago by Tikka to slowly increase sales of Tikka rifles, they brought Ryan on with SFWA to pair the two together. UM is now their LLC they’re all running their collective business through after Form sold us all with tens of thousands of round counts, dropping scopes from the top of the Grand Canyon, and shooting large animals with teeny tiny bullets.

I see through all of you. The rest of you are just sheep.

 

[TX_Diver]

I'd agree with whoever posted a solid color with webbing as an option.

From the site some of the simpler ones like

https://www.unknownmunitions.com/wp-content/uploads/2022/12/DSC03928-copy-scaled.jpg

Custom BAT Machine Ignitier Sniper Green and Glock FDE

Or even transition camo

https://www.unknownmunitions.com/wp-content/uploads/2023/04/DSC07005-1-scaled.jpg

look good.

Obviously all this is extremely specific and arbitrary, but I assume that since UM asked for opinions they're interested in at least hearing what people think. If they don't pick one of those or I don't like the pattern I'll just get plain carbon and paint it myself. Or if plain carbon is a few $ cheaper I'd just order it. That'd be even better IMO!

 

[fwafwow]

Please stop posting references to the custom options. I really don't want any of those. Especially not Layer 1 in orange (CMYK0 74 88 0/RGB245 102 0 - looking for matching Cerakote codes). Or the Custom BAT Machine Igniter Sniper Green and Glock FDE Cerakote. Or Multicam Desert. Or any of them, because then I will think about sending in the rest of the rifle, because hunting is a fashion show, and I need to match.

Which brings me back to my fancy Micklagaard pants (now inbound). Maybe Layer 1 in a wool gray pattern with tasteful deer leather colored accents?

 

[TX_Diver]

If we're basing it off clothing options how about plaid...

https://www.cerakote.com/project-gallery/14179/cerakoted-buffalo-plaid-bolt-action-rifle-cerakoted-with-h-221-hir-146-h-317-and-h-306

 

[Sandstrom]

 

[robtattoo]

View attachment 637603View attachment 637604
View attachment 637606

Captain Krylon for the win!

 

[atmat]

View attachment 637603View attachment 637604
View attachment 637606

Be honest: are these pics from Big Stick?

 

[Frank Dux]

I’m tired of flipping through pages. Is there a pic of the entire stock, latest version? Has a weight been established?

Thank you, I’ve spent last 30 minutes trying to find info.

 

[Frank Dux]

and yes, I am at work, on the internet, shopping for a rifle stock

 

[bojangles808]

I really like the kuiu vias type pattern with the bigger blobs than typical multicam UM has done but in different colors. Maybe not exactly vias but something similar in a tan brown and black (would be exposed carbon) would be a sweet standard option. Maybe carbon instead of grey here in tis UM build
.

 

[HingleMcCringleberry]

Krylon, or whatever. Aesthetics are at the bottom of the list. It literally takes a few minutes to spray paint a stock, if you wish.

Just give me the capability.

 

[roosiebull]

My chassis has MDT machined all over it. Pretty sure Tikka has a Tikka logo on the bottom of the grip. Same for other stocks on other rifles.

Logo on bottom of grip?

My xlr as well, subtle logos don’t bother me

View attachment 637603View attachment 637604
View attachment 637606

 

[Sandstrom]

Be honest: are these pics from Big Stick?

Yes sir they are!! I do enjoy reading what he says, and he does have tons of good info once you translate it
With so many of the comments lately focusing on looks and not what really matters (how does it work) I thought it would be a fun to post up some real world camo
Ryan

 

[svivian]

Surprised its already on the website with color options available

UM-products-ROKSTOCK

 

[Brontosaurus]

Surprised its already on the website with color options available

UM-products-ROKSTOCK