RokStok

[waspocrew]

Yep, spacer or file down the screw slightly.

 

[duffman]

If you’re tightening to 65in lbs try 60 or 55. I had that happen to me. The back screw is touching your bolt. Mine stopped at 55 if I remember right.

This was the issue, filed it down and g2g. I think I was so concerned about the early lug issues I ignored the rear screw all together. Thanks!

 

[mxgsfmdpx]

It looks like it’s the rear action screw protruding slightly, which is strange since it was fine before. Torqued to 65 in/lbs.

I was so focused on the lug and front action screw and didn’t think to check the rear screw itself.

I’ve never had this issue before, should I use a spacer/washer on the stock bottom metal or shorten the screw by a .5 or 1 thread?

Spacers and less torque and you’ll be good to go.

 

[HighUintas]

So what is the weight of a rokstok with sendero inlet and plain non scalloped foreend when you have 2 spacers installed?

I was wanting one thinking that it would fit me perfectly with no spacers and weight would be close to 26-28oz.... But that possibility seems to be disappearing.

 

[PBBananaHammock]

Yes. The way the stock is designed, longer LOP is less of an issue than in other stocks. Quite the opposite- almost everyone is better suited to .5” to 1” longer LOP than normal.

I’m 6’ and am accustomed to using a slightly shorter LOP to accommodate layers and/or less than ideal body positions.

Im giving the longer 14” LOP a try, given that was a desirable attribute in the Rokstok design. I like the extra leverage holding offhand, but how do you recommend setting eye relief? Especially to accommodate forgiveness with layers and positioning. Do you set eye relief so you’re at near max neck extension for consistency? It feels as if I have to set a 6x42 pretty far back in the rings if that’s not the case.

If it makes a difference, I rarely shoot on my belly. 95% standing/kneeling/sitting.

 

[Formidilosus]

Do you set eye relief so you’re at near max neck extension for consistency? It feels as if I have to set a 6x42 pretty far back in the rings if that’s not the case.

Depends on how you shoot. I am relatively insensitive to how the scope is set up.

If it makes a difference, I rarely shoot on my belly. 95% standing/kneeling/sitting.

I’d probably set it up in sitting or kneeling.

 

[doverpack12]

Were some of you able to get spacer kits without sending the stock back? My LOP spacer kit was missed, I didn’t realize it had to be UM installed. Jake worked through it and made it right but I don’t have a spacer kit unless I wanted to ship my stock back. I might just do that if the lug protrusion issue doesn’t go away…

In the meantime I figured out LOP was the it felt so unsteady for me and I was way too close to the scope. Made myself some spacers and bought longer screws. 1 oz

Had a thinner one that wasn’t enough, on the middle size now and have one more I can go to easy. My scope can’t really go forward.

 

[nighthawkf-117]

Has anyone tried adding threaded inserts and glueing them in with epoxy? McMaster has a wide variety of threaded inserts and i bet you could find one that would work

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

 

[canyonhunter47]

When are these going to be for sale again?

 

[SteveAndTheCrigBoys]

When are these going to be for sale again?

Sometime between mid-Feb and early March IIRC.

 

[atmat]

Sometime between mid-Feb and early March IIRC.

of 2026

 

[canyonhunter47]

of 2026

At this rate I’ll find 8208 on clearance and have a stack of tmk’s and SWFA 3-9 and 6x’s before orders open up on a rock stock

 

[mxgsfmdpx]

At this rate I’ll find 8208 on clearance before orders open up on a rock stock

I don't think it's very far away at all. I believe they are opening up 100 for sale at a time starting within the next 30 days.

 

[Billy Goat]

I don't think it's very far away at all. I believe they are opening up 100 for sale at a time starting within the next 30 days.

Vegas taking odds on the previous first day orders being filled by then?

 

[ChrisAU]

Got my QC call Monday for my August REM 700 inlet order. Much excite!

 

[Jon Boy]

A lot sooner than people might think…

 

[CoryM181]

I've never heard anyone talk about the recoil pad.. good, bad?

 

[NSI]

I've never heard anyone talk about the recoil pad.. good, bad?

Better than you'd think from looking at it.

-J

 

[mxgsfmdpx]

I've never heard anyone talk about the recoil pad.. good, bad?

No weird "shoulder shape" in it, not overly soft and squishy, not overly hard. Very shootable. There are some instances with the rubber peeling off the plastic, can be glued back on easily.

 

[IrkedCitizen]

Just got an email from Cody saying my R700 LA arrived