RokStok

[BBob]

I'm all for doing away with the idea of barrel channels period a la manners LRH and PH

and KRG Bravo

 

[roosiebull]

We know what they look like. We're interested in what you perceive as downsides, other than aesthetics.

-J

Beef?

 

[roosiebull]

Busting alders with a tight barrel channel on a Kimber Montana I had leaves and contact between the stock and barrel that I found when the hunt was over and I pulled the action from the stock (so much dirt and debris I actually ran it under a faucet).

Busting alders with a sendero channel on a Rokstok and a T3x Lite profile barrel, I had no debris and could verify that at a glance.

If people hunt truly thick stuff, the only good options are full length bedding or a very large gap. Also, the sendero channel on the factory lite barrel looks just fine in person.

If people are worried about getting twigs/etc in a big gap, keeping your extra barrel tape just ahead of the stock on the barrel will solve that

I just don’t care, because I know a perfect looking gap will get lots of crap in there I can’t get out without dropping the barreled action, and you can’t know how bad it is

Big gap you can see and clear without taking it apart.

At the same time, I don’t care if people want cosmetics over function, but there is no good argument for a sporter channel unless you choose looks over function.

 

[roosiebull]

If people hunt truly thick stuff, the only good options are full length bedding or a very large gap. Also, the sendero channel on the factory lite barrel looks just fine in person.

I agree, i like the large gap, between the salmonberry, pecker pole alders and dog hair reprod, a cosmetically pleasing gap will be full of crap in short order and you won’t know until you drop the stock, and I’m not great about maintenance during season, I always found that mess after the season was over.

 

[Wrangler13]

What was the update on the rokstock lite? Anyword on the Kimber inlet?

 

[Stocky]

There's obviously some different opinions and points of view on this subject. I don't have to have the prettiest gun on the mountain, but I just can't get into the "dead cat" mentality. And by the way, I actually think the Rokstok looks pretty cool. Especially with some of the cerakote jobs that I've seen on them.

I'm definitely not saying it needs to be crazy wide but the above with a 3b and factory contour looks fine and still has heaps to go. I thought they were getting rid of the sporter option anyway.

 

[B_Reynolds_AK]

Also, the sendero channel on the factory lite barrel looks just fine in person.

I second this. When I fondled Marble's Rokstok, I thought it was the 3B profile until he told me it was the Sendero. I would have no issue using this and I am normally fairly particular in the fit and finish of a product.

 

[khuber84]

I brought my tl3/hvy palma nrl hunter barreled action over with my rokstok that's cut 3b. Told the smith, make this fit with ample clearance. Any of my other barrels will fit with ease after this.

 

[atmat]

What was the update on the rokstock lite?

To add to this: what modifications are being made to the Rokstock to allow the weight to be cut so much for the Lite?

 

[khuber84]

To add to this: what modifications are being made to the Rokstock to allow the weight to be cut so much for the Lite?

Different density fill.

 

[Gadjet]

I'm definitely not saying it needs to be crazy wide but the above with a 3b and factory contour looks fine and still has heaps to go. I thought they were getting rid of the sporter option anyway.

I’m not digging my heels in the sand on my opinion. After reading some of the last few comments I can see where it actually makes sense to have a little more room in the channel. Learn something new every day I guess.

 

[lintond]

I like the LE green a lot in person, it’s too bad that process is such a pain, and future stocks will be 1 color cerakote, but I’m glad this one became a reality

I found no problems with inleting or fit, dropped right in and everything fit correctly, barrel is centered in the barrel channel

The texture doesn’t show up that much, doesn’t change the look. I will have one on every tikka.

Hoping the short LOP version becomes a reality, because I would love to build a 6 creed for my daughter and the shorter rokstok is the ideal stock, but mine may fit her fine too, the trigger reach makes it feel like shorter lop than it is

Definitely sticking with the LE green. Thanks for the photos.


Sent from my iPhone using Tapatalk

 

[Harvey_NW]

I’m not digging my heels in the sand on my opinion. After reading some of the last few comments I can see where it actually makes sense to have a little more room in the channel. Learn something new every day I guess.

I agree with you that there's a happy medium that is fully functional and aesthetically pleasing though. I just think having an 1/8" or even 3/16" clearance around the barrel in the stock doesn't look as atrocious and you would initially think, especially if it's centered in the channel.

 

[NSI]

@Stockys @Unknown Munitions

Nice job on the new consolidated product page. 2 questions:

Can the Tikka Rokstok be ordered with a CTR inlet (for running aftermarket short action AICS bottom metal)? If not, would you open it up as a paid service?

Is the Howa Mini action accounted for under Howa Short on the current drop down, or will that require a separate mold/inlet? Guessing you might be waiting on the RS Lite for that.

Thanks,
-J

 

[Bc45]

Just got shipping notification. Ordered day of release bare carbon with extra spacers

 

[JCMCUBIC]

After spending a fair amount of time using a few of them, I'm happy to use a completely open barrel channel with only the outer shell and no fill. An example is the Grayboe Trekker. Along with minimal action area inlet depth (think chassis), it makes a very generic production model, reducing cost and time, while also reducing weight.

 

[walk2112]

Just got shipping notification. Ordered day of release bare carbon with extra spacers

Right on, maybe let us see a picture of those spacers when ya get em?

 

[Stockys]

Right on, maybe let us see a picture of those spacers when ya get em?

Here’s a picture of the spacer system

 

[D R T]

I like the LE green a lot in person, it’s too bad that process is such a pain, and future stocks will be 1 color cerakote, but I’m glad this one became a reality

I found no problems with inleting or fit, dropped right in and everything fit correctly, barrel is centered in the barrel channel

The texture doesn’t show up that much, doesn’t change the look. I will have one on every tikka.

Hoping the short LOP version becomes a reality, because I would love to build a 6 creed for my daughter and the shorter rokstok is the ideal stock, but mine may fit her fine too, the trigger reach makes it feel like shorter lop than it is

That looks bad ass! I’d get one if still available.

 

[Strider]

Does anyone have pictures of a non pattern rokstock? Just plain Jane one color? Not bare carbon. Has one been posted in this thread?