Rokstok Lite

[prm]

More trivia: what are you seeing for weight? Just the wood and recoil pad, or including bottom metal/trigger guard if you have that.

 

[longrangelead]

More trivia: what are you seeing for weight? Just the wood and recoil pad, or including bottom metal/trigger guard if you have that.

just the wood and 1" pad was 20 Oz.
The .6" Decelerator will be standard.
a railed Lite needs more wood to attach the rail, BUT, the wood removed for the rail may off-set that so we'll see.
I have one more trick but I need to run it by Jake first...

 

[waspocrew]

Left is Plain Walnut, center curly walnut, right Claro Walnut (also fancy)

Very nice looking stocks! Someday I’ll pony up and go with a wood stock.

 

[Moosehunter]

Is there a mold yet for carbon lite models?
Sorry if I've missed it.

 

[longrangelead]

Is there a mold yet for carbon lite models?
Sorry if I've missed it.

The wood prototype is being used to develop the carbon mold. Don't know where in the process it is so stay tuned.

 

[Moosehunter]

The wood prototype is being used to develop the carbon mold. Don't know where in the process it is so stay tuned.

Thanks! That's what I needed!

 

[prm]

just the wood and 1" pad was 20 Oz.
The .6" Decelerator will be standard.
a railed Lite needs more wood to attach the rail, BUT, the wood removed for the rail may off-set that so we'll see.
I have one more trick but I need to run it by Jake first...

That is excellent. Once DBM is installed that will be a very small weight penalty over the composite Montana stock.

 

[TheM1DoesMyTalking]

Just swapped a few messages with Jake.
The Lite is live...

Wood Rokstok Lite - Unknown Munitions

Handmade wood Rokstok by Mike Maxwell from Alpine Rifles in Western Montana. Available Inlets: Tikka, REM 700 S/M/L, Vesper S/M/L, MRC, M70, Blaser Professional. Available Inlets that need additional lead time: Howa 1500/Mini, Savage, Browning, Ruger, Kimber. All stocks are pillar bedded. Yes...

www.unknownmunitions.com

If you scroll down, there is some inlet info...

hopefully this will get this thread back on track...

What is the standard LOP on the Lite stock? The UM website doesn't specify, only gives instructions on how to make a note:

• Please make notes if longer LOP is needed, a LOP kit recoil pad will be installed.

 

[wyosam]

just the wood and 1" pad was 20 Oz.
The .6" Decelerator will be standard.
a railed Lite needs more wood to attach the rail, BUT, the wood removed for the rail may off-set that so we'll see.
I have one more trick but I need to run it by Jake first...

Is there enough wood to flush mount a standard spartan gunsmith adapter up front?


Sent from my iPhone using Tapatalk

 

[longrangelead]

Is there enough wood to flush mount a standard spartan gunsmith adapter up front?


Sent from my iPhone using Tapatalk

if it's noted on the order, I can leave wood for it. otherwise the forend is channeled out to reduce weight.

 

[longrangelead]

What is the standard LOP on the Lite stock? The UM website doesn't specify, only gives instructions on how to make a note:

• Please make notes if longer LOP is needed, a LOP kit recoil pad will be installed.

Standard has been 13.5" so far. I messaged Jake it's not on the product page.