Restocked SWFA 3-9x42 Gen 1

[BjornF16]

So I emailed Tim about the unadvertised set of shims for the 3-9 SWFA on Feb 28, never heard back. Is this the correct email for him?

[email protected]

I'm probably just going to go to the hardware store at this point with a turret in hand and get some nylon washers.

I traded messages with him via eBay…he said to just order what is listed on eBay and put a note that you want the 3-9 shims.

I did exactly that and received the 3-9 shims

 

[Mike Islander]

Who said anything about accidentally?
It only has 5 mils per rev

You shooting far enough for a full turn? 600 yards ELDM is 38 clocks,. 0.8 turns. If not on zero after you forget to reset it after a sgizt, dial down, right?

And please forgive me if I'm being dense here.

 

[BRTreedogs]

You shooting far enough for a full turn? 600 yards ELDM is 38 clocks,. 0.8 turns. If not on zero after you forget to reset it after a sgizt, dial down, right?

And please forgive me if I'm being dense here.

I do
And I guess let’s just say I’m a big fan of a good zero stop

 

[Akexis972]

Cantharellus, thanks for sharing! I'm too late. They're sold out

 

[BjornF16]

MK Machining

SWFA SS 3-9x42 HD FFP Scope Cap Set

SWFA SS 3-9x42 HD FFP Scope Cap Set . Strong, Durable, Precise Fit. The perfect option for protecting the lenses on any optic....

www.mkmachining.com

I ordered a set of these. The ocular cap was way too small (I ended up cracking the plastic by forcing it on).

Ocular size I received was 1.575”. MKM said SWFA provided the measurements.

MKM was great and mailed me out a larger ocular cap (1.673” but it was just slightly too large). I had to tape the ocular end in order to get it to fit tight enough to not spin or fall off.

Anyone get a set and have this issue?

 

[BRTreedogs]

Cantharellus, thanks for sharing! I'm too late. They're sold out

I have one for sale

 

[Weldor]

Here’s the covers I found to fit the best. Mk up front and a switch cover by Vism on the ocular.