Restocked SWFA 3-9x42 Gen 1

So I emailed Tim about the unadvertised set of shims for the 3-9 SWFA on Feb 28, never heard back. Is this the correct email for him?

[email protected]

I'm probably just going to go to the hardware store at this point with a turret in hand and get some nylon washers.
I traded messages with him via eBay…he said to just order what is listed on eBay and put a note that you want the 3-9 shims.

I did exactly that and received the 3-9 shims
 
MK Machining
I ordered a set of these. The ocular cap was way too small (I ended up cracking the plastic by forcing it on).

Ocular size I received was 1.575”. MKM said SWFA provided the measurements.

MKM was great and mailed me out a larger ocular cap (1.673” but it was just slightly too large). I had to tape the ocular end in order to get it to fit tight enough to not spin or fall off.

Anyone get a set and have this issue?

1742140622354.png
 
Here’s the covers I found to fit the best. Mk up front and a switch cover by Vism on the ocular.
 

Attachments

  • IMG_1218.jpeg
    IMG_1218.jpeg
    377.9 KB · Views: 27
  • IMG_1217.jpeg
    IMG_1217.jpeg
    272.3 KB · Views: 27
  • IMG_1214.jpeg
    IMG_1214.jpeg
    363.3 KB · Views: 27
  • IMG_1215.jpeg
    IMG_1215.jpeg
    237.5 KB · Views: 29
You shooting far enough for a full turn? 600 yards ELDM is 38 clocks,. 0.8 turns. If not on zero after you forget to reset it after a sgizt, dial down, right?

And please forgive me if I'm being dense here.

22lr's and 223s get cranked a lot. Have maxed out the elevation more than a handful of times just seeing what can be done.

Getting lost in turret land is a real thing. :ROFLMAO:

Come to think of it. I got lost in turret land with a 300RUM an a 12x as well!
 
  • Like
Reactions: BLJ
I ordered a set of these. The ocular cap was way too small (I ended up cracking the plastic by forcing it on).

Ocular size I received was 1.575”. MKM said SWFA provided the measurements.

MKM was great and mailed me out a larger ocular cap (1.673” but it was just slightly too large). I had to tape the ocular end in order to get it to fit tight enough to not spin or fall off.

Anyone get a set and have this issue?

View attachment 854265
Had the exact same issue but my measurement after breaking the small on measured 1.629 on the ocular, and I contacted so she sent me a 1.634 for replacement and it’s perfect.
Just ordered a second set and just put it in the notes so hoping I receive the 1.634”
 
Had the exact same issue but my measurement after breaking the small on measured 1.629 on the ocular, and I contacted so she sent me a 1.634 for replacement and it’s perfect.
Just ordered a second set and just put it in the notes so hoping I receive the 1.634”
Depending on how I measure, I get between 1.625” and 1.635”.

I’ve asked for 1.634” replacement.
 
22lr's and 223s get cranked a lot. Have maxed out the elevation more than a handful of times just seeing what can be done.

Getting lost in turret land is a real thing. :ROFLMAO:

Come to think of it. I got lost in turret land with a 300RUM an a 12x as well!

Haven't tried it with mine, but nylon washers might work for zero stop. I use them on four 6X SWFAs. Personally don't turn these far enough to matter.
 
The only time its ever really happened was when shooting a handful of rifles. A paint mark would do near the same thing IMO as the washers.
 
Back
Top