Restocked SWFA 3-9x42 Gen 1

[JustSomeGuy35]

Looks like I just wasted $10 on the 29 then.

You can always wrap some electrical tape on it to help hold it together.

 

[HighUintas]

My local Scheels doesn't have a 30 obj in stock, so I'm just going to use the 29 and see how it does.

One gripe I have about the BC caps is that the objective cap flips open so easily while I've got it strapped to my pack. Maybe the extra tight fit will mitigate that issue

 

[jfk69]

My local Scheels doesn't have a 30 obj in stock, so I'm just going to use the 29 and see how it does.

One gripe I have about the BC caps is that the objective cap flips open so easily while I've got it strapped to my pack. Maybe the extra tight fit will mitigate that issue

Good luck. With BC caps, I’ve found the tighter they fit on the objective or ocular, the EASIER they are to inadvertently flip open. It’s the thing I dislike the most about them.

 

[Weldor]

Looks like I just wasted $10 on the 29 then.

Warm it up with a heat gun, before you install . It will be fine.

 

[Weldor]

I use the Vism, they have a nice clamp and foam tape if needed. I like how they flip pen and lay flat.

 

[Brix8984]

Back in stock if anyone missed out.

 

[lelliott8]

Only lets me add 11 to cart so get them quick

 

[nettereo16]

Got 1, thank you

 

[Alpha Echo]

Thanks for the heads up!

 

[Alpha Echo]

What kind of grease is everyone using on the turret o-rings?

 

[ChrisAU]

What kind of grease is everyone using on the turret o-rings?

Would like to know as well

 

[jfk69]

What kind of grease is everyone using on the turret o-rings?

I used a food safe grease I use on the O-ring seals on my homebrew Corny kegs in my kegerator. Whether it was the best or not I don’t have a clue. It worked lmao.
I was more interested in how hobbies can overlap and support each other lol.

 

[justpassingthru]

Looks like 4 units in stock as of now

SWFA 3-9x42 SS HD - MIL-Quad Reticle, 30mm Tube, .1 MIL Clicks, FFP

In sub-zero temperatures or searing desert heat (-50 degrees to +130 degrees Fahrenheit, and altitudes of 30,000 feet to depths of 15 feet in salt water) the waterproof, shockproof, fogproof SS performs. Whatever the weapon, from .223 to .50 BMG, the SS handles the recoil. Whatever the target...

swfa.com

Cyclops for 10% off

Ordered a second one after being thoroughly impressed with the first from a few weeks ago. By far the best money I’ve spent on a scope

 

[jfk69]

Got them here. I contacted the seller, who’s known on multiple forums, and asked if he was still making them for the 3-9. He responded that he did have a 3-9 kit available and to send him a message with the purchase asking for them. So I bought the kit and sent him a message. These come very well recommended.

Zero Stop for SWFA Super Sniper Scopes | eBay

We manufacture zero stop shim sets for use with SWFA Super Sniper scopes. You MUST select the correct turret type or the shim set will not work with your scope. It will be marked milrad or MOA. The shim sets for all the fixed power scopes and also the 3-15 are all identical and interchangeable.

www.ebay.com

My shims arrived today and are a perfect fit. I messed with them even though I haven’t mounted the scope yet. Bought on flea bay in the link in my earlier post. Messaged the seller and asked for a 3-9 kit. Told the seller Tim that I wanted them for the 3-9 and he promptly shipped them out. They fit the 3-9 like a glove. Now I just actually need to get the scope on a rifle. Soon.

 

[prm]

A silicone grease should be fine for O rings

 

[Amos Moses]

My shims arrived today and are a perfect fit. I messed with them even though I haven’t mounted the scope yet. Bought on flea bay in the link in my earlier post. Messaged the seller and asked for a 3-9 kit. Told the seller Tim that I wanted them for the 3-9 and he promptly shipped them out. They fit the 3-9 like a glove. Now I just actually need to get the scope on a rifle. Soon.

I did the same and installed them tonight. Great fit. I sanded down one of the smallest shims and got it to stop .1 mils past my 100 yard zero.

 

[mahonsr]

Small ranger band fixes the stiff power ring without the bulk of a throw lever. 12$ for an assorted sized bag on Amazon.

Does it just give you a little extra grip? How does it help?

 

[sndmn11]

If you guys are buying the zero stop shims, save the side some money and buy them direct.

Instructions from Tim...

"Thank you for your interest in our Zero Stop shim sets for SWFA Super Sniper scopes. We support the following scopes:


Fixed power models – the entire line. $27/set

3-15 X 42 $27/set

5-20HD $27/set (Note: SWFA says these will NOT void the warranty now. They are approved.)

Fixed power HD models $27/set


All the scopes except the 5-20 are available with MOA or milrad turrets. You MUST specify which style turret you have. If in doubt, it’s noted on top of the turret.



There is an installation video here:

Note that the video is for the original fixed power scopes, but the basic procedure is similar for all the different scopes. The actual number of shims and markings will vary from model to model.



Tibosaurus Rex did a video here:

Ordering is easy. We accept PayPal (preferred) and all types of paper money including personal checks and money orders. To order, please use your preferred method and send the appropriate amount to [email protected] or the physical address below.

Tim Kulin

2790 Wood Valley Court

Woodland Park, CO 80863



When ordering, be sure to include your shipping address. You wouldn't believe how many people forget. Please also note if your scope's turrets are in MOA or milrads. If you don't specify, we will assume mil rad."