JustSomeGuy35
WKR
You can always wrap some electrical tape on it to help hold it together.Looks like I just wasted $10 on the 29 then.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
You can always wrap some electrical tape on it to help hold it together.Looks like I just wasted $10 on the 29 then.
Good luck. With BC caps, I’ve found the tighter they fit on the objective or ocular, the EASIER they are to inadvertently flip open. It’s the thing I dislike the most about them.My local Scheels doesn't have a 30 obj in stock, so I'm just going to use the 29 and see how it does.
One gripe I have about the BC caps is that the objective cap flips open so easily while I've got it strapped to my pack. Maybe the extra tight fit will mitigate that issue
Warm it up with a heat gun, before you install . It will be fine.Looks like I just wasted $10 on the 29 then.
What kind of grease is everyone using on the turret o-rings?
I used a food safe grease I use on the O-ring seals on my homebrew Corny kegs in my kegerator. Whether it was the best or not I don’t have a clue. It worked lmao.What kind of grease is everyone using on the turret o-rings?
My shims arrived today and are a perfect fit. I messed with them even though I haven’t mounted the scope yet. Bought on flea bay in the link in my earlier post. Messaged the seller and asked for a 3-9 kit. Told the seller Tim that I wanted them for the 3-9 and he promptly shipped them out. They fit the 3-9 like a glove. Now I just actually need to get the scope on a rifle. Soon.Got them here. I contacted the seller, who’s known on multiple forums, and asked if he was still making them for the 3-9. He responded that he did have a 3-9 kit available and to send him a message with the purchase asking for them. So I bought the kit and sent him a message. These come very well recommended.
![]()
Zero Stop for SWFA Super Sniper Scopes | eBay
We manufacture zero stop shim sets for use with SWFA Super Sniper scopes. You MUST select the correct turret type or the shim set will not work with your scope. It will be marked milrad or MOA. The shim sets for all the fixed power scopes and also the 3-15 are all identical and interchangeable.www.ebay.com
I did the same and installed them tonight. Great fit. I sanded down one of the smallest shims and got it to stop .1 mils past my 100 yard zero.My shims arrived today and are a perfect fit. I messed with them even though I haven’t mounted the scope yet. Bought on flea bay in the link in my earlier post. Messaged the seller and asked for a 3-9 kit. Told the seller Tim that I wanted them for the 3-9 and he promptly shipped them out. They fit the 3-9 like a glove. Now I just actually need to get the scope on a rifle. Soon.
Does it just give you a little extra grip? How does it help?Small ranger band fixes the stiff power ring without the bulk of a throw lever. 12$ for an assorted sized bag on Amazon.