Razco new product release.

Justin (Raz) Rasmussen

FNG
Rokslide Sponsor
Joined
Feb 11, 2017
Messages
78
Location
Gallatin Valley Montana
After many many emails, DMs, texts asking for this solution we are proud to be offering this product to ya'll
It has been a 5 year journey to get this thing dialed in to where we are.

Without further ado I present to you the R.O.M.R. (pronounced Roamer)

You can now buy one holster shell and have the flexibility to wear it as a chest holster, bino harness holster, pack mount holster, or velcro mounted.

Want to swap between multiple sidearms depending on where you're headed, no problem.

Swapping the holster shell to whichever mounting backer you need for that particular outing takes seconds, rather than unbolting and fussing with small parts.

By integrating the QD component into the backers themselves, you don't have a lot of extra bulk and standoff.

Any of our current Gen 2 holsters can be retrofitted to this system.

Buy piece by piece as you need or buy the whole kit and save a few bucks

We utilized the G Code RTI interface so you can also use your holster shell on any of G Codes excellent mounting options such as drop legs , battle belts, molle.

You can even use a Safariland, Blackhawk, or Bladetech holster shell and with the appropriate RTI plate, integrate your favorite holster shell to our mounts.

ROMR website click here
1000002891.jpg1000002889.jpg1000002890.jpg1000002892.jpg
 

Jsteel

FNG
Joined
Dec 15, 2023
Messages
60
Location
Richland, WA
After many many emails, DMs, texts asking for this solution we are proud to be offering this product to ya'll
It has been a 5 year journey to get this thing dialed in to where we are.

Without further ado I present to you the R.O.M.R. (pronounced Roamer)

You can now buy one holster shell and have the flexibility to wear it as a chest holster, bino harness holster, pack mount holster, or velcro mounted.

Want to swap between multiple sidearms depending on where you're headed, no problem.

Swapping the holster shell to whichever mounting backer you need for that particular outing takes seconds, rather than unbolting and fussing with small parts.

By integrating the QD component into the backers themselves, you don't have a lot of extra bulk and standoff.

Any of our current Gen 2 holsters can be retrofitted to this system.

Buy piece by piece as you need or buy the whole kit and save a few bucks

We utilized the G Code RTI interface so you can also use your holster shell on any of G Codes excellent mounting options such as drop legs , battle belts, molle.

You can even use a Safariland, Blackhawk, or Bladetech holster shell and with the appropriate RTI plate, integrate your favorite holster shell to our mounts.

ROMR website click here
View attachment 649265View attachment 649266View attachment 649267View attachment 649268
Awesome!
 

lintond

WKR
Joined
Mar 17, 2013
Messages
1,611
Location
Oregon
[mention]Justin (Raz) Rasmussen [/mention] do you have a video that shows the retention system closer up? Seems like you need access to the back of the plate based on the limited video on the product page to remove it.

Wondering about removing it from pack belt that’s mounted snug in molle….


Sent from my iPhone using Tapatalk
 
OP
Justin (Raz) Rasmussen

Justin (Raz) Rasmussen

FNG
Rokslide Sponsor
Joined
Feb 11, 2017
Messages
78
Location
Gallatin Valley Montana
[mention]Justin (Raz) Rasmussen [/mention] do you have a video that shows the retention system closer up? Seems like you need access to the back of the plate based on the limited video on the product page to remove it.

Wondering about removing it from pack belt that’s mounted snug in molle….


Sent from my iPhone using Tapatalk
Sure I can work on that
 
Joined
May 21, 2024
Messages
11
After many many emails, DMs, texts asking for this solution we are proud to be offering this product to ya'll
It has been a 5 year journey to get this thing dialed in to where we are.

Without further ado I present to you the R.O.M.R. (pronounced Roamer)

You can now buy one holster shell and have the flexibility to wear it as a chest holster, bino harness holster, pack mount holster, or velcro mounted.

Want to swap between multiple sidearms depending on where you're headed, no problem.

Swapping the holster shell to whichever mounting backer you need for that particular outing takes seconds, rather than unbolting and fussing with small parts.

By integrating the QD component into the backers themselves, you don't have a lot of extra bulk and standoff.

Any of our current Gen 2 holsters can be retrofitted to this system.

Buy piece by piece as you need or buy the whole kit and save a few bucks

We utilized the G Code RTI interface so you can also use your holster shell on any of G Codes excellent mounting options such as drop legs , battle belts, molle.

You can even use a Safariland, Blackhawk, or Bladetech holster shell and with the appropriate RTI plate, integrate your favorite holster shell to our mounts.

ROMR website click here
View attachment 649265View attachment 649266View attachment 649267View attachment 649268
Awesome
 
OP
Justin (Raz) Rasmussen

Justin (Raz) Rasmussen

FNG
Rokslide Sponsor
Joined
Feb 11, 2017
Messages
78
Location
Gallatin Valley Montana
[mention]Justin (Raz) Rasmussen [/mention] do you have a video that shows the retention system closer up? Seems like you need access to the back of the plate based on the limited video on the product page to remove it.

Wondering about removing it from pack belt that’s mounted snug in molle….
Video is up on our social media
 
Last edited:

LFC911

WKR
Joined
Jul 15, 2020
Messages
578
Location
Lenexa, KS
Just curious what keeps the holster secured to the mounting backer when you're drawing the weapon from the holster? Is there some type of positive lock/unlock for the QD system?
 

crich

WKR
Joined
Jul 7, 2018
Messages
856
Location
AK
This does exactly what a qls/mls system does with less bulk. Well done might have to try it out.
 
Top