Question About Tikka CTR Stock and 223 Mags

[Lonewolf72]

I need a clarification regarding using a Tikka CTR stock and magazine on a T3x Lite barreled action. I have a CTR stock and bottom metal from a 6.5CM. I would like to drop my 223 T3x Lite barreled action into this CTR stock. Do I only need to switch to CTR mags made for the 223, with no other changes or modifications? Do 223 CTR mags have the same external dimensions as a 6.5CM CTR mag, with the 223 mag only having a larger block and narrower feed lips for the shorter 223 Rem cartridge? Thanks.

 

[Castle Rock]

Yep, you just need a 223 mag

 

[mtnwrunner]

What he said. ^^^^^^^^^^^^.


Randy

 

[Lonewolf72]

Thanks for the confirmation, guys!

 

[allaue87]

I did this exact thing - new t3x .223 lite into a t3x ctr stock (with bottom metal) I pulled from a 6.5CM. I had to buy a .223 caliber specific CTR magazine (about $100). I had to remove the metal clip that was attached to the trigger before dropping the barreled action into the stock. While I was at it, I brought the trigger pull all the way down.
It works great, but the magazine is a little loose. It doesn't fall out or anything though. I have been loading .223 rounds at 2.260" and 2.335" with 73gr eldm. I am trying 77 TMK next though because I couldn't get a decent sub-moa group with TAC. The rounds chamber so smooth, you don't even feel it pick it up.