Castle Rock
WKR
- Joined
- Mar 28, 2020
- Messages
- 1,186
It is only slow if you afraid to get after it, F class shooters are getting about 3000 with 80s, admittedly with long barrelsNothing wrong with Varget, except the slow speed
It is only slow if you afraid to get after it, F class shooters are getting about 3000 with 80s, admittedly with long barrelsNothing wrong with Varget, except the slow speed
Yep, CFE is not a good accuracy powder with heavy bullets for some reason. It works better for light bullets.Varget is hard to beat. With normal throated chambers and even some with extra freebore, i haven't been able to stuff enough in there to get to pressure but I know I'm close. Typically I start noticing seating depth inconsistency from the amount of powder before anything else.
I havent had luck with CFE 223 in anything and I've tried it multiple times.
That's just my experience though.
Going with varget and tmk 77 but I haven’t shot yetDid you find a good load for this? I just took mine out to the range and couldn't get a 5-shot sub MOA group with 73gr ELDM and Ramshot TAC. The best group had maybe 0.5 MOA if I took out a flyer, but it can be better. I seated 0.020" off the lands like I would in my 6.5 CM rifle. I tried the following charges:
23.4
23.8
24.2
24.6
I didn't see any pressure signs at the highest charge, so I might go higher? I also have a CTR magazine so once I shoot these 73's , maybe I will switch over to the 75gr since I can load longer. I'm sort of committed on the TAC powder for a while before I can try something else. Any ideas for anyone else?