Painting a stock

[TheGDog]

View attachment 783736

Ooh! Can you expand on how to add cheek riser to the factory 783 stock like that?

I'd really like to add something like that to at least two of my rifles.

A 783, and a Savage 93R17.

 

[OneShot]

Ooh! Can you expand on how to add cheek riser to the factory 783 stock like that?

I'd really like to add something like that to at least two of my rifles.

A 783, and a Savage 93R17.

Here is a thread on this particular cheek riser. It was very easy to install. If you have questions, feel free to PM me.

Cheek riser bargain.

Quick heads up (pun intended) I just found these & they seem like a hell of a deal if you're wanting to avoid kydex. I just ordered 2. https://www.ebay.com/itm/145494600411?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=gnSuERNoRVu&sssrc=4429486&ssuid=iDuv8uDWSwO&var=&widget_ver=artemis&media=COPY

rokslide.com

 

[Shortschaf]

Do you remember if you used khaki or sand for the tan tone?

Probably 80% of the tan coloring is khaki and the rest was sand randomly blended in. The sand is a little bright for my tastes

 

[Rockhard2]

Looks good

 

[zpearo]

Going to have to sponge paint my stock now...

 

[Marty]

My sons and I had some fun sponge painting this MRC (sure does need a Rokstok).

Pretty simple process:

1. Remove barreled action
2. Prep surface
3. Sponge paint
4. Several light layers of clear coat (optional)
5. Re-assemble

 

[zpearo]

Is there any special type of paint and clear coat that should be used for durability?

 

[thinhorn_AK]

Any ideas on how to copy that older NULA stripe camo?

 

[OneShot]

Is there any special type of paint and clear coat that should be used for durability?

I’ve used both Krylon and rustoleum on many stocks without any issue. I like to use a flat or a matte paint and also a flat or matte finish. If you take your time with a good, quality prep(sanding and wiping with acetone). Your paint will bond well. Once I like the look of the finish paint, I will spray 5-7 coats of clear. Some of my stocks have been though a lot and have held up great.
If a factory stock is tan, I’ll spray it with a flat black bonding primer before doing sponge work.

 

[Gasman]

Used Rustoleum Desert Bisque sand texture spray paint. it is recommended to use a Krylon primer prior to final Rustoleum paint.

@MTGunner

I know that this is regarding an older post, but any particular reason why a Krylon primer before using a Rustoleum paint and not a Rustoleum primer? TIA.

 

[MTGunner]

Krylon seems to stick to the Tupperware stocks better. Of course proper preparation is essential. MTG

 

[Wyo_hntr]

Is there any special type of paint and clear coat that should be used for durability?

Personally I don't use a clear coat. Ever.

 

[TheGDog]

Here is a thread on this particular cheek riser. It was very easy to install. If you have questions, feel free to PM me.

Cheek riser bargain.

Quick heads up (pun intended) I just found these & they seem like a hell of a deal if you're wanting to avoid kydex. I just ordered 2. https://www.ebay.com/itm/145494600411?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=gnSuERNoRVu&sssrc=4429486&ssuid=iDuv8uDWSwO&var=&widget_ver=artemis&media=COPY

rokslide.com

Hrmm... Seems like there's Kydex ones, then the kind this link spoke about.

(The link has since expired BTW)

What is less desireable about the Kydex-based ones? Do BOTH types require drilling the stock to mount the Cheek Riser?

 

[260284]

Some matte paint, cheap grout sponges, and about 30 minutes in the garage. No clear and it has held up good so far. Pretty easy to touch up if needed. Wiped everyting down with acetone first.

 

[bmart2622]

Simple single color on a Stockys VG for a Howa mini. Original bare carbon was way too glossy.

Sponge and several coats of matte clear coat looked much better.

Before:
View attachment 783561

After:
View attachment 783562View attachment 783563

That came out great! Did you scuff up the stock first or just degrease it?

 

[waspocrew]

That came out great! Did you scuff up the stock first or just degrease it?

Thanks! Just degreased it with a little acetone. Seemed to work out fine!

 

[OneShot]

Definitely run sand paper over the whole Stockys carbon fiber. I just fixed one that a buddy did. He only cleaned with acetone and did not sand to give the clear something to bond to. He had multiple spots of clear flake off over the carbon fiber. Especially where the bipod was. Anywhere there was paint, it didn’t have an issue. When he brought it to me to fix, I could easily scratch the clear off of the areas with clear directly over the carbon fiber. I’ve always scuffed mine and haven’t had that issue.