Painless load development (mine)

[huntnful]

It's once fired Hornady frontier if that makes a difference

No it doesn’t. You need to chamfer the case mouth. That is the solution

 

[9487329]

No it doesn’t. You need to chamfer the case mouth. That is the solution

I figured. I appreciate it

I made 33 , that was probably the worst of them. I'll group them and post the results for fun

 

[huntnful]

I figured. I appreciate it

I made 33 , that was probably the worst of them. I'll group them and post the results for fun

No problem! You’ll be dialed in no time! There’s only a few things are really important, and chamfering the case mouth (really just the inside) is one of them.

 

[wind gypsy]

You don’t need “extra lube” after resizing. I only see issues like that if I forget either lube or chamfering. It’s most likely lack of chamfering, as just mentioned.

I've never seen such a thing and I have almost never seated bullets into intentionally lubricated necks. Rather, they almost always have lube tumbled off before prime/charge/seating steps.