Painless load development (mine)

[Q_Sertorius]

Most def different lots

I’ve personally never witnessed a shift like that from lot to lot either. But maybe I don’t understand the scale. It looks like a 1.5” shift from center of the red square?

 

[rdp123]

I shoulda measured when I had it in front of me, but I think more like ~1” down ~0.5” right

 

[Gstew1930]

First time with this bullet or powder. Loaded 10 half a grain under book max. I think this one is good to go

 

[huntnful]

26” Carbon benchmark in 6 creed.

First 8 down the barrel. 108 ELDM & 41gr. H4350. 2.800” COAL

I always just shoot a group wherever it lands, after bore sighting. I like to see how the first few round down the barrel act without dialing turrets. This one should be….. fine.

 

[HuntHarder]

26” Carbon benchmark in 6 creed.

First 8 down the barrel. 108 ELDM & 41gr. H4350. 2.800” COAL

I always just shoot a group wherever it lands, after bore sighting. I like to see how the first few round down the barrel act without dialing turrets. This one should be….. fine.
View attachment 1019150
View attachment 1019155
View attachment 1019151
View attachment 1019152

Which bergers are you trying and how did they shoot. That first group is impressive!

 

[NDHUNTER24]

26” Carbon benchmark in 6 creed.

First 8 down the barrel. 108 ELDM & 41gr. H4350. 2.800” COAL

I always just shoot a group wherever it lands, after bore sighting. I like to see how the first few round down the barrel act without dialing turrets. This one should be….. fine.
View attachment 1019150
View attachment 1019155
View attachment 1019151
View attachment 1019152

You switching to carbon barrels?

 

[huntnful]

Which bergers are you trying and how did they shoot. That first group is impressive!

I tried the 109 LRHT and 105 Hybrid. The SAAMI freebore on the 6 creed has them jumping pretty good, just to be a seat them a modest ways in the case neck. But they both shot pretty decent really. Going to spend more time with the 109 LRHT’s for sure.

You switching carbon barrels?

I can’t help but keep trying things. I’ll have one more carbon cut in 6.5-7 PRC. And the rest are still steels.


Here’s a 21 shot group I shot with my 7-300 NMI and 195 Berger’s, between shooting the 6CM….. that’s a steel kreiger.

 

[NDHUNTER24]

I tried the 109 LRHT and 105 Hybrid. The SAAMI freebore on the 6 creed has them jumping pretty good, just to be a seat them a modest ways in the case neck. But they both shot pretty decent really. Going to spend more time with the 109 LRHT’s for sure.


I can’t help but keep trying things. I’ll have one more carbon cut in 6.5-7 PRC. And the rest are still steels.


Here’s a 21 shot group I shot with my 7-300 NMI and 195 Berger’s, between shooting the 6CM….. that’s a steel kreiger.
View attachment 1019180

i think you groups are tighter with the 7-300 NMI

 

[huntnful]

i think you groups are tighter with the 7-300 NMI

No seriously lol. That gun shoots excellent, but it’s a pain in the ass keeping up on the load honestly.

 

[Thejet]

I tried the 109 LRHT and 105 Hybrid. The SAAMI freebore on the 6 creed has them jumping pretty good, just to be a seat them a modest ways in the case neck. But they both shot pretty decent really. Going to spend more time with the 109 LRHT’s for sure.


I can’t help but keep trying things. I’ll have one more carbon cut in 6.5-7 PRC. And the rest are still steels.


Here’s a 21 shot group I shot with my 7-300 NMI and 195 Berger’s, between shooting the 6CM….. that’s a steel kreiger.
View attachment 1019180

What speeds are you getting with that 7-300?

 

[huntnful]

What speeds are you getting with that 7-300?

That group was just fire forming with 80gr. H1000 at 2950fps. They go like 3100-3200fps out of a 26” depending on powder though.

 

[jonnyviceroy]

I tried the 109 LRHT and 105 Hybrid. The SAAMI freebore on the 6 creed has them jumping pretty good, just to be a seat them a modest ways in the case neck. But they both shot pretty decent really. Going to spend more time with the 109 LRHT’s for sure.


I can’t help but keep trying things. I’ll have one more carbon cut in 6.5-7 PRC. And the rest are still steels.


Here’s a 21 shot group I shot with my 7-300 NMI and 195 Berger’s, between shooting the 6CM….. that’s a steel kreiger.
View attachment 1019180

Cmon man…. Now you’ve got me questioning everything I learned from Bryan litz’ TOP gun theory. (Theory of precision) Absolutely insane shooting, good work man.

 

[huntnful]

Cmon man…. Now you’ve got me questioning everything I learned from Bryan litz’ TOP gun theory. (Theory of precision) Absolutely insane shooting, good work man.

Hahaha it has a good muzzle brake and is decently heavy (11.25lbs). Most of it just has to do with the rifle build itself, not really me. I don’t mind showing that it can be done though. That was off a hatch bipod. I left the sled clamped to the 6CM