OG Suppressor Early Access Rokslide Link

[HairyScandinavian]

So wait, the OG doesn't fit the roughtech?

It says "Up to .750” diameter barrels."

 

[benconfused]

It says "Up to .750” diameter barrels."

"The Tikka T3x Lite Roughtech barrel profile, specifically the "D18" profile, is similar to a .730 muzzle threaded superlite palma barrel that is also fluted. The barrel tapers down to a .656 inch diameter just behind the threaded muzzle protector."

Sounds like it fits to me.

 

[JBahr]

Seems like the latest podcast where they measured the OG they said .820 at the 4” from the threads.


Sent from my iPhone using Tapatalk

 

[yeti14]

So wait, the OG doesn't fit the roughtech?

The issue is the M15 threads on the tikka. You need an adapter to go to 5/8s and risk loosing the adapter inside the suppressor if it came off the barrel threads.

 

[Formidilosus]

Clean your threads with brake cleaner or alcohol. Use roksett on the adaptor. It will not come off in the suppressor.

 

[walkingduckwaterfowl]

It would be sick if you could buy these through silencershop. I know they are using the silencershop environment, but I mean the same way I can buy every other brand through silencershop...like shipped to my dealer with no worries. A lot of my local FFL's are charging 200$ for NFA transfer fee and that's rough on top of the tax stamp. If it was distributed through silencershop there is no transfer fee and you can buy it right on their website. Hoping to see that as an option in a few years as the suppressor itself seems very awesome.

 

[cuerro viejo]

It would be sick if you could buy these through silencershop. I know they are using the silencershop environment, but I mean the same way I can buy every other brand through silencershop...like shipped to my dealer with no worries. A lot of my local FFL's are charging 200$ for NFA transfer fee and that's rough on top of the tax stamp. If it was distributed through silencershop there is no transfer fee and you can buy it right on their website. Hoping to see that as an option in a few years as the suppressor itself seems very awesome.

Ouch my SOT with kiosk is $100

 

[Nine Banger]

Ouch my SOT with kiosk is $100

same...

 

[walkingduckwaterfowl]

Ouch my SOT with kiosk is $100

Yeah...even that is 100$ more than I have spent on transfer fees for my last four cans I bought through SS. That's me sitting on my couch and then certifying the form online. One trip to go pick it up when its approved. I understand UM is a small business and they need the money up front just like the rokstoks but hopefully some day the suppressor side of it can be big enough to front some inventory to SS for ease of distribution! The design looks to have potential to be epic especially when they can incorporate a brake in the future.

 

[ChrisAU]

Yall gotta find better dealers. Mine treats it like a firearm, $20.

 

[cuerro viejo]

Yeah...even that is 100$ more than I have spent on transfer fees for my last four cans I bought through SS. That's me sitting on my couch and then certifying the form online. One trip to go pick it up when its approved. I understand UM is a small business and they need the money up front just like the rokstoks but hopefully some day the suppressor side of it can be big enough to front some inventory to SS for ease of distribution! The design looks to have potential to be epic especially when they can incorporate a brake in the future.

I image they will eventually, probably need best margins for first 5 months to get back on top of printer cost.

 

[Deadspace]

Yall gotta find better dealers. Mine treats it like a firearm, $20.

Same. Mine here in Las Cruces charges $25

 

[cuerro viejo]

Same. Mine here in Las Cruces charges $25

Mine does firearms for $25 suppressor not so much

 

[HuntHarder]

Secretly hoping US takes a few weeks to fulfill orders. Might save me $200.00. I have a feeling the run on suppressors, short term, might be insane.

 

[fwafwow]

Yall gotta find better dealers. Mine treats it like a firearm, $20.

Ditto. I think my LGS charges $40 for any firearm, or suppressor, shipped to them. My LGS is also my gun trust attorney, so there is some added cost - but that would be the case regardless of source.

 

[fwafwow]

Secretly hoping US takes a few weeks to fulfill orders. Might save me $200.00. I have a feeling the run on suppressors, short term, might be insane.

Being very optimistic, that law change won't take effect until 10/1/25, but it's more likely going to be 1/1/26 - if it passes without change.

 

[HuntHarder]

Being very optimistic, that law change won't take effect until 10/1/25, but it's more likely going to be 1/1/26 - if it passes without change.

I forgot it's our federal gov't. 2026 is probably optimistic. Maybe they will go retroactively and reimburse.

 

[fwafwow]

I forgot it's our federal gov't. 2026 is probably optimistic. Maybe they will go retroactively and reimburse.

For me the $200 isn't the key, it's removing suppressors from the NFA - which will probably save me some coin in any future trust updates for new cans, etc. - assuming that isn't changed back in the future.

If anyone is going to reach out to their Senators to encourage support, one tweak to possibly suggest is for an earlier effective date.I posted in the other thread, but this effective date is weird in that it combines 90 days plus the next calendar quarter. Maybe that has something to do with ATF internal issues?

if they enact by ~July 2nd, then the effective date is 10/1. If they can't get it enacted by ~10/4/25, the effective date won't be until 3/1/26.

But I'm breaking one of my personal guidelines - don't bother to pay attention to any pending legislation until it is passed, as usually doing so is a complete waste of time.

 

[benconfused]

The issue is the M15 threads on the tikka. You need an adapter to go to 5/8s and risk loosing the adapter inside the suppressor if it came off the barrel threads.

The suppressor purchase is becoming less and less urgent to me. Don't like the idea of a required adapter and the risk of it getting stick in there for any reason.

At some point I'll upgrade to an Ace barrel and then maybe it'll be suppressor time.

 

[Kaleb]

I don’t have any concerns about the adapter. I ordered the tool to remove it should it get stuck somehow. It is going to go on a 5/8 rifle but I got the adapter so I can try it on a couple others. If I was that concerned about it I’d red locktite or roksett it on the barrel. Worst case scenario I’m sure you could mail it to unknown to be removed but that would be kinda like silly since they sale the tool to remove it.