Official Rokslide Group Buy - Unknown Suppressors OG-6S

[WhisperPickle]

Also, is this 5/8x24?

I would also want to know if it's 5/8-24 or if it could be 1/2-28. The only 2 rifles I would use it on are 1/2-28 being an AR and a 6ARC Howa.

5/8-24 Like all the other US OTB cans.

 

[Cory_Shoot2Hunt]

Any rough estimate on that time frame (Capital Armory)? I’ll have a credit with them pretty soon, and had planned on getting a second OG65, but I would prefer this one. However, waiting a few or several months runs contrary to my level of patience when there are alternatives.

Also, is this 5/8

We will ship capital’s 6mm cans in about a week or two tops give or take a few business days. So they should have them on the website ready to sell within a few weeks I’d think…

 

[Foster_65]

We will ship capital’s 6mm cans in about a week or two tops give or take a few business days. So they should have them on the website ready to sell within a few weeks I’d think…

Are going to ship the cans that have been spoken for for the group buy or wait for the two weeks then reach out for payment. Just curious

 

[brandonlowe17]

Official Rokslide Group Buy
Unknown Suppressors OG6-S

Rokslider's,
This will be a 2 week Group Buy for the new OG6-S suppressor.
The discount will be 20%. MSRP is $799. Group Buy price will be $639 + $9.95 S/H.
No limit on number and you can choose color.
Unknown will reach out to you after the Group Buy is finished and they have the complete list.
You will need to read the clear instructions layed out below and provide ALL of the information requested.


Specs:
6" total length. 3" in front of barrel.
6mm bore diameter.
Sub 7 oz.

Per Cliff: The finalized design will be complete by April 1st.
I will update the thread when I have photos
and official specs.

Per Form: It's really quiet, sounds great and is very hollow sounding.
That is as specific as information that I have.

* Any specific questions regarding the can, options, colors etc need to be directed to @Unknown Suppressors

Directions:

Direct Message me the following info:

~ Full name, first and last.
~ Cell Number
~ Your Email address
~ Name of Shop that you will use for the transfer. (Include City and State)
~ Number of OG6's and color.


View attachment 1042089View attachment 1042090

Can you DM me? Its not allowing me to send DM

 

[B_Reynolds_AK]

Can you DM me? Its not allowing me to send DM

You've gotta have message permissions on Rokslide, ie 10 or more posts, not just a lurker. Find 8 more threads that interest you and add something of value to them. Group Buy will be open for another week.

 

[Cory_Shoot2Hunt]

Are going to ship the cans that have been spoken for for the group buy or wait for the two weeks then reach out for payment. Just curious

Cliff or Ben need to speak on the logistics here. I just know capital are shipping as soon as we finish Cerakote because they placed the order weeks ago.

 

[B_Reynolds_AK]

Are going to ship the cans that have been spoken for for the group buy or wait for the two weeks then reach out for payment. Just curious

Per Cliff, he wanted an updated list from me every day or two as they are getting the transfers ready and will ship out the cans as soon as possible. He anticipated 100 cans available by April 1st with more available within the following couple weeks, depending on demand from the Group Buy.

 

[shayes11]

Per Cliff, he wanted an updated list from me every day or two as they are getting the transfers ready and will ship out the cans as soon as possible. He anticipated 100 cans available by April 1st with more available within the following couple weeks, depending on demand from the Group Buy.

Has the Group Buy hit that 100 can mark yet?

 

[B_Reynolds_AK]

Has the Group Buy hit that 100 can mark yet?

Nope, we are around 70. I wasn't aware of the Capital order, so can't say wether the 100 cans Cliff mentioned included them or not.

 

[BRTreedogs]

.750 max barrel diameter I believe was mentioned?

 

[B_Reynolds_AK]

.750 max barrel diameter I believe was mentioned?

Correct

 

[Cory_Shoot2Hunt]

Nope, we are around 70. I wasn't aware of the Capital order, so can't say wether the 100 cans Cliff mentioned included them or not.

Did not include them.

 

[Unknown Suppressors]

Any rough estimate on that time frame (Capital Armory)? I’ll have a credit with them pretty soon, and had planned on getting a second OG65, but I would prefer this one. However, waiting a few or several months runs contrary to my level of patience when there are alternatives.

Also, is this 5/8x24?

the cans going to capital will ship next week! I'm not sure how long it will take them to get them on their site and in stock!

 

[Unknown Suppressors]

Nope, we are around 70. I wasn't aware of the Capital order, so can't say wether the 100 cans Cliff mentioned included them or not.

I have total 140 that will be ready to ship next week, but I am printing more right now, based on what sales look like right now I do not anticipate I will be out of stock by the time the ones I'm making now will be ready to ship!

 

[jonnyviceroy]

Does anybody know if an 18” 3B contour is below .750? Can’t find an exact answer so far. Just waiting on a few 3B barrels I’m not sure if they’d work with.

 

[Unknown Suppressors]

Does anybody know if an 18” 3B contour is below .750? Can’t find an exact answer so far. Just waiting on a few 3B barrels I’m not sure if they’d work with.

who made the barrel?

 

[wind gypsy]

Does anybody know if an 18” 3B contour is below .750? Can’t find an exact answer so far. Just waiting on a few 3B barrels I’m not sure if they’d work with.

It won’t be below .75 at least if it’s true to bartlein spec. Figure 0.7” + 0.01” for every inch shorter than 26” =0.780”. Take 1.5” off the shank rather than muzzle and you’d be at 0.765”.

 

[jonnyviceroy]

who made the barrel?

One from preferred bb and another bartlein from SJA.

 

[jonnyviceroy]

It won’t be below .75 at least if it’s true to bartlein spec. Figure 0.7” + 0.01” for every inch shorter than 26” =0.780”. Take 1.5” off the shank rather than muzzle and you’d be at 0.765”.

Ok cool. Sounds like I may need to wait for the 4” reaper. Thanks for your help man!

 

[Formidilosus]

4,000ft DA, 50° F, 60% humidity.

18” 6cm, Hornady 105gr.

OG6-S, 131.0 dB (A)
View attachment 1042355


Same rifle and ammo, TBAC UL7 Gen 2 for control. 130.3 dB(A)
View attachment 1042356

Video finally uploaded. No sound for some reason, but you can see the meter.

OG6-S

TBAC UL7 Gen 2:

16” 223, OG6-S. 131.2 dB(A)


Also, at the end there is something interesting to compare dry fire dB to some claimed suppressor numbers…

14.5” midgas. OG6-S, right ear port pop- 147.1 dB(A)



Left ear- 135.7 dB(A)

14.5” Midgas, TBAC UL7 Gen 2.

Right ear port pop- 149.8 dB(A)




Left ear- 136.5 dB (A) for three shots-