OFFICIAL Peterson Cartridge Customer Support Thread

[wind gypsy]

I may have missed it, but what new cartridges do you actually have plans to make brass for?

At this point, it doesn’t really appear to be that much, which is definitely a let down. 223 would be awesome, 7 SAUM would also be a great seller.

I've seen multiple people calling for 7 SAUM. Far as I can tell ADG 7 SAUM has been on the shelf and available for a while now. I think they only make it for a week or 2 a year and yet it's not sold out. That doesn't tell me that there is pent up unmet demand that Peterson is missing out on..

 

[HighUintas]

It seems that me that @Peterson Cartridge Co should make 300 rcm brass since it is nearly identical to necked up 6.5 prc.

 

[waspocrew]

I've seen multiple people calling for 7 SAUM. Far as I can tell ADG 7 SAUM has been on the shelf and available for a while now. I think they only make it for a week or 2 a year and yet it's not sold out. That doesn't tell me that there is pent up unmet demand that Peterson is missing out on..

ADG must have ramped up production on the 7 SAUM on the recent run(s). I’ve been surprised to see it in stock as well. Prior to this, you couldn’t keep it in stock and many were willing to pay crazy prices for just 100 pieces of brass.

I do believe it would sell consistently, it obviously wouldn’t be flying off the shelves as it did in the past though (again likely because ADG listened and kicked out a ton more production).

I use Peterson brass for my 22 Creed, 6 Creed, 6.5 Sherman (270 win), and now 6.5 PRC. It’s great brass. I’m merely echoing others and saying I’d buy Peterson 7 SAUM brass over others if it was available.

 

[Peterson Cartridge Co]

ADG must have ramped up production on the 7 SAUM on the recent run(s). I’ve been surprised to see it in stock as well. Prior to this, you couldn’t keep it in stock and many were willing to pay crazy prices for just 100 pieces of brass.

I do believe it would sell consistently, it obviously wouldn’t be flying off the shelves as it did in the past though (again likely because ADG listened and kicked out a ton more production).

I use Peterson brass for my 22 Creed, 6 Creed, 6.5 Sherman (270 win), and now 6.5 PRC. It’s great brass. I’m merely echoing others and saying I’d buy Peterson 7 SAUM brass over others if it was available.

Thank you for shooting Peterson in the chamberings we offer for you!

 

[wyosam]

Apparently Peterson Cartridge Company has no interest in any market other than the guys shooting the latest fad chambers at a thousand yards.
For the rest of us,
" unfortunately, we have no plans", so go piss up a rope.
I'll look to Hornady, Starline, Lapua and others. Peterson can kiss my as s.

Sounds like somebody should start their own family run brass business. Is Lapua making the cartridges you want? That’s a great option if they are. There are lots of older chambering I’d love to build, just because I like to tinker. However if I can’t easily source enough brass (either properly head stamped or something I can make it from) to last the life of the barrel, I’ll build something else.) if you have an older oddball, quality cartridge is a good place to look. There are certainly plenty of offerings from Peterson that aren’t the “latest fad chambers”. The tooling required to make a specific case is an enormous expense. They are a business, and have to make smart decisions.


Sent from my iPhone using Tapatalk

 

[Peterson Cartridge Co]

Sounds like somebody should start their own family run brass business. Is Lapua making the cartridges you want? That’s a great option if they are. There are lots of older chambering I’d love to build, just because I like to tinker. However if I can’t easily source enough brass (either properly head stamped or something I can make it from) to last the life of the barrel, I’ll build something else.) if you have an older oddball, quality cartridge is a good place to look. There are certainly plenty of offerings from Peterson that aren’t the “latest fad chambers”. The tooling required to make a specific case is an enormous expense. They are a business, and have to make smart decisions.


Sent from my iPhone using Tapatalk

Quality Cartridge, located in Hollywood, Maryland, is a great place to check for hard to find & wildcat casings. Pete Cardona is likely who you'll talk with there! Give him a ring! 301-373-3719

 

[chindits]

What is your recommended cleaning method for primer pockets. Some of my 6.5cm brass is on there 17th reload and 4 out of 12 pockets are getting really loose. Also at what point would you recommend just throwing away that brass. I currently use a wire primer pocket brush in a drill.

 

[MooreAK]

I bought some loaded Peterson ammunition in 270win a while back, any chance this will be a regular thing in this or other cartridges ?

 

[Peterson Cartridge Co]

What is your recommended cleaning method for primer pockets. Some of my 6.5cm brass is on there 17th reload and 4 out of 12 pockets are getting really loose. Also at what point would you recommend just throwing away that brass. I currently use a wire primer pocket brush in a drill.

We advise against any primer pocket cutting or uniforming! A wire primer pocket brush is perfect for cleaning primer pockets!

 

[Peterson Cartridge Co]

I bought some loaded Peterson ammunition in 270win a while back, any chance this will be a regular thing in this or other cartridges ?

Our loaded ammunition line has been discontinued.

 

[chindits]

We advise against any primer pocket uniforming! We believe that primer pocket cleaning is not necessary, if you must, a wire primer pocket brush is an okay option!

Interesting. Well I’ve never tried seating a primer in a dirty pocket. I guess I’ll see what happens.

I was shooting in the rain this weekend so I actually threw my muddy cases in a case tumbler with corn cob median. Two primers fell out just with that, so I figured it was a good time to throw those cases out. I usually don’t clean my cases anymore.

 

[Peterson Cartridge Co]

Congratulations to the podium finishers! Thank you to all shooters, RO's, and supporters that joined us for this year's Peterson Challenge!​

 

[Peterson Cartridge Co]

Hello all!
Not something we're going to do consistently, but I wanted to stop in and let everyone know what we have on press currently!
.243 Win
6.5-300 Wby Mag
10.36 x 77 (.408 CheyTac®)
Thanks!
-David

 

[HighUintas]

Hello all!
Not something we're going to do consistently, but I wanted to stop in and let everyone know what we have on press currently!
.243 Win
6.5-300 Wby Mag
10.36 x 77 (.408 CheyTac®)
Thanks!
-David

Is that 243 win SRP by chance?

 

[mthunter1989]

Any chance you guys are going to pick up 22 ARC as a line?

 

[Peterson Cartridge Co]

Is that 243 win SRP by chance?

We are potentially discontinuing our SRP variant of .243 Win. We unfortunately have no plans to produce it again at this time.

 

[Peterson Cartridge Co]

Any chance you guys are going to pick up 22 ARC as a line?

We have no plans for 22 ARC at this time.

 

[JJ1179]

How about 7mm STW?

 

[jgraff08]

Why buy a fan club cartridge and not stick with fanclub brass big h can do no wrong

 

[Raghornklr]

Back to asking for 6.8 western brass