Nitride Services (January Batch to H&M)

[cal30_sniper]

RE: nitriding the bolt, I am also going to send our bolts to get DLC.

I can easily expand the offering to Nitride and DLC if enough people want to mix and match or do anything else.

This is what I'd like to do. Nitride action and DLC bolt on a Stainless Defiance 700.

Then I'll have to sandblast and oven paint my polished barrel so it doesn't look weird, haha.

 

[hereinaz]

When do you expect this to be happening?

They are actually on the website right now for sale, and deliverable beginning of January. Prices will likely go up some when I can't source these cheap Eurooptic rifles...

Actions - Page 1 - LS Wild Armory

lswildarmory.com

 

[waldo9190]

Depending on cost I might be interested in sending in a blued Tikka action for Nitride. Not concerned about the bolt.

 

[pods8 (Rugged Stitching)]

Yeah, but he's DLC'ing the bolts too I think.

True but in my mind that is a nice to have vs a need to have, ie I don't think stainless bolt on a nitrided action is a concern. He also is using blued actions if I recall correctly.

Reasoning or advantage to only nitriding action?

NSI said he's had issues with the bolt lugs becoming brittle when nitriding and had a couple chip.

 

[Nine Banger]

You WILL have to strip the action and bolt of ALL pieces parts on your own. I don’t want to strip Tikka bolts… nor do I have time. So, it will be $1,000,000.00 if you ask me to take a bolt apart.

There are going to be a lot of new posts like this:

WTB: Tikka ejector spring

 

[wind gypsy]

There are going to be a lot of new posts like this:

WTB: Tikka ejector spring

Yeah, better take that bolt into the shower and close the door/curtain for containment.

 

[pods8 (Rugged Stitching)]

There are going to be a lot of new posts like this:

WTB: Tikka ejector spring

LOL! I've definitely been crawling around the floor looking for them before. I strip the bolts when setting up a die initially.

Also REMOVE THE FIRING PIN before trying to take out the drift pin holding in the ejector.

 

[pods8 (Rugged Stitching)]

Yeah, better take that bolt into the shower and close the door/curtain for containment.

That's a weird fetish...

 

[Nine Banger]

Yeah, better take that bolt into the shower and close the door/curtain for containment.

fishnets or no fishnets?

 

[Nine Banger]

Also REMOVE THE FIRING PIN before trying to take out the drift pin holding in the ejector.

Yup, did that once when I was troubleshooting.

My brass was grinding and I was taking it in and out and in and out. Turned out it was crud from nitriding stuck in the bottom of the blind hole that I removed with a drill bit but maybe the 3rd time I went to get it back apart I forgot to remove the firing pin.

Had to drill it out and pick up a kit from Ebay to get a new roll pin.

I was sad but happy the firing pin wasn't ruined.

 

[amassi]

I’d be in for 2x nitride action DLC bolt package if you were so inclined


Sent from my iPhone using Tapatalk