New TMK announced

[streamerfish]

Looks like Mid-March is when Sierra expects these to be open for sale. View attachment 1007223

I know everyone is hot on the big 6mm bullets. But if someone wants to do serious damage on animals that shoot a 6.5, that 153 is pretty spicy.

 

[MTniko]

After seeing what the 77 can do, I'm pumped for the 88s. The 107s are of great interest as well. Fingers crossed availability will be alright!

 

[khuber84]

I know everyone is hot on the big 6mm bullets. But if someone wants to do serious damage on animals that shoot a 6.5, that 153 is pretty spicy.

I don't see how they got a 292g7 on a 107tmk, then a 153 is 320?! Weird, I will trust nothing till verified.

 

[HairyScandinavian]

I know everyone is hot on the big 6mm bullets. But if someone wants to do serious damage on animals that shoot a 6.5, that 153 is pretty spicy.

I'm definitely wanting to try them, just hope I can push them fast enough. The 147's I'm shooting now are already almost too slow (factory though).

 

[Matt5266]

What's the consensus on a stock Tikka 243 being throated for the 116 grain? They look pretty looong

 

[PathFinder]

What's the consensus on a stock Tikka 243 being throated for the 116 grain? They look pretty looong

Throating them deeper is cheap and easy.

 

[Carl Ross]

What's the consensus on a stock Tikka 243 being throated for the 116 grain? They look pretty looong

M+ mags allow a reasonable amount of jump in mine, .050 or .060 iirc. I would have to go to a longer mag to jamb.

 

[Matt5266]

M+ mags allow a reasonable amount of jump in mine, .050 or .060 iirc. I would have to go to a longer mag to jamb.

What COAL did you end with? Any issues stabilizing in the 1:8 243 Tikka? Do you think the 107 or 116 will hit 1800 fps further? Im going down a rabbit hole before I make a large bullet purchase since im just starting with a new to me 243 lol

 

[justin davis]

I know everyone is hot on the big 6mm bullets. But if someone wants to do serious damage on animals that shoot a 6.5, that 153 is pretty spicy.

Yea I plan to try those too

 

[huntnful]

The 107 at .292 G7 is too interesting not to try. Then for sure the 116, 153 and 7mm 185 (if I still have a 7mm by then)

 

[HOT ROD]

I hope to get my hands on sum 6.5 cal 153 grain Tmks to try in my prc...

 

[Treeman_MG]

What COAL did you end with? Any issues stabilizing in the 1:8 243 Tikka? Do you think the 107 or 116 will hit 1800 fps further? Im going down a rabbit hole before I make a large bullet purchase since im just starting with a new to me 243 lol

This is what I want to know. . . .seems like the 116 may not be fully stable in 8 twist, near sea level (my hunting areas range from 700'-1500' ASL).

 

[Carl Ross]

What COAL did you end with?

Just checked, 2.967" was .040" off and what I took hunting.

Any issues stabilizing in the 1:8 243 Tikka?

No, but it's possible I was getting a small amount of BC loss. I didn't do enough testing to clearly show either way.

Do you think the 107 or 116 will hit 1800 fps further?

Hard to say without ever having any 107's.

Im going down a rabbit hole before I make a large bullet purchase since im just starting with a new to me 243 lol

I get it, good luck.

 

[ddowning]

Nice. 116gr in 6mm. Can’t wait until they’re available. I’m hoping to get 2800fps out of my 7.5twist 243.

How long is your barrel?

 

[ddowning]

This is what I want to know. . . .seems like the 116 may not be fully stable in 8 twist, near sea level (my hunting areas range from 700'-1500' ASL).

I tried 115 dtacs in a 1:8 button rifled criterion years ago and had issues. When we started checking criterion twists a few years ago, they tend to run a little slow so it was probably a 1:8.3 or 1:8.4. At about 1000' ASL it was fine above 70 degrees. I had to start adjusting the bc with the temp at about 60 degrees and at 35 degrees it fell apart completely in the wind. It was a 26" 243AI at around 3050 fps.

After that, I run 1:7 button rifled or 1:7.5 cut rifled. At 3200 fps with 105s you're above 300k rpm with a 7 twist which I don't love. If you have the velocity, a 7.5 twist is the sweet spot. In Dasher and BRA I use all 1:7 twist. The lower velocity (about 2800 fps) drops rpms down some and everything is good.

 

[wind gypsy]

I don't see how they got a 292g7 on a 107tmk, then a 153 is 320?! Weird, I will trust nothing till verified.

The 153 seems to have a long bearing surface and relatively short nose (for a 153). Sounds like the 107 is pretty aggressive.

 

[Matt5266]

Just checked, 2.967" was .040" off and what I took hunting.


No, but it's possible I was getting a small amount of BC loss. I didn't do enough testing to clearly show either way.


Hard to say without ever having any 107's.


I get it, good luck.

Thank you for the responses! Im leaning towards the 107. Seems like it might be the easy button between the 2 we shall see.

 

[2Stamp]

I'd love to use the 107 or 116 for black bear this year. I suspect I may be disappointed on the "mid March" timeline though.

 

[43.6N]

I'd love to use the 107 or 116 for black bear this year. I suspect I may be disappointed on the "mid March" timeline though.

Same boat. Hoping to get 88’s in time for bear.
If not, I’m trying out 85.5 bergers.