New 2025 Burris Fullfield

[JHcaliber9]

I haven’t read much on these. Does anyone have any experience with Burris revamp of the Fullfield? Looks like it’s only been out for a short amount of time (a few months). Specs seems okay. Short bodies and iffy eye relief, but do they hold zero? Thank you. Considering a 3-12 for a 30-06 set and forget. Scope won’t be dialed.

 

[peaches]

So far so good with a 2-10. I like the target reticle, glass is fine, mounting is a pain with short tube length and the 40mm is actually 52mm (go up in mount heights). Worth the $ if you can get it to fit on your rifle.

 

[David1289]

I was interested in Burris Signature HD 2-10x40 (#200530) or maybe the Fullfield 3-12x42 (#201533). I’m not sure how the glass compares between the two, but if it was about equal then I may consider saving a bit more for the Fullfield 2.5-10x42 (201512).

Anyone happen to know how the glass compares?

My intention is to find a hunting scope to shoot out to 400 yds with a simple reticle, like the idea of adjustable elevation turret, prefer fixed parallax (because it’s one less thing to worry about while hunting), and decent enough glass for low light conditions.

I’m thinking the 10x or 12x is enough. Open to suggestions as well.

 

[bigunit]

I have 2 of the 2-8×35 and they seem solid so far. I put them on cva scouts. One in 350l and one in 6.5 cm. The glass is optically very good and so far the turrets have been spot on.

 

[prm]

I can’t help with a glass comparison between those two. I do have an old FFII 3-9 and the glass is certainly good enough. If comparing to an SWFA 6x or Trijicon Credo 3-9 I would have to repeatedly look through them side by side to discern a meaningful difference. The FFII might come third in that comparison, but it’s close and certainly not preventing any shots.

 

[Bama67]

My Burris' are the only cheap scopes I have that have always held zero. Much better than my far more expensive Leupolds.

 

[David1289]

Thanks for sharing. I have a Burris Euro Diamond 2.5-10x42 that has been a great scope. I thought I would like to get a similar one now.

 

[Motown]

My kid just picked up a new Tikka laminate 308 and I put a 2-10 on it with Hawkins rings. Had to go with high rings due to the short tube, but their highs are the same height as Talley mediums. Haven’t shot it yet but hope to soon.

 

[KnightExtreme]

Have a Burris Fullfield on a few Rifles (1 has the original pos lock turrent) the 2nd does not but recently picked up the 200347 for a T/C Omega ML Rifle helpimg a friend set up his used but new to him Omega. I have always used the Burris Signature type Rings with the inserts same for what I using on this Omega. Have not put it on yet. He might go with the Burris Xtreme Signature Tactilcal Rings once we figure out what height he will need? But the other 2 I have had have not let me down. so far!
KE