Oct 21, 2024 #1 S sparelink FNG Joined Jul 20, 2017 Messages 55 Location Oregon Biggest concern with the 633 is the column getting in the way when in a seated position. Not sure if it will interfere if it is in the down position or if this will be the same on the 643. Is one model preferred over the other?
Biggest concern with the 633 is the column getting in the way when in a seated position. Not sure if it will interfere if it is in the down position or if this will be the same on the 643. Is one model preferred over the other?
Oct 21, 2024 #2 D desertdwellerdyl Lil-Rokslider Joined Jun 22, 2024 Messages 110 Location AZ You should be able to unthread the center column, I did it this weekend with the 843 while glassing seated.
You should be able to unthread the center column, I did it this weekend with the 843 while glassing seated.
Oct 21, 2024 #3 hereinaz WKR Rokslide Sponsor Joined Dec 21, 2016 Messages 3,624 Location Arizona Both will interfere with sitting to some extent, unless fully extended. I like fewer sections. They seem more stable. You can always cut the center to fit your style.
Both will interfere with sitting to some extent, unless fully extended. I like fewer sections. They seem more stable. You can always cut the center to fit your style.
Oct 21, 2024 #4 C Camera Land WKR Rokslide Sponsor Joined Jan 13, 2017 Messages 1,499 The Slik CF634 Center column is removable, which allows the tripod to be set at a minimum height of 3.5" Slik CF-633 Center column is removable, which allows the tripod to be set at a minimum height of 4.9" Hope that helps
The Slik CF634 Center column is removable, which allows the tripod to be set at a minimum height of 3.5" Slik CF-633 Center column is removable, which allows the tripod to be set at a minimum height of 4.9" Hope that helps