N560/565/570 for 7PRC/300WM?

philcox

WKR
Joined
Nov 27, 2018
Messages
773
Location
Auburn, CA
I am currently running 168 LRX w/ RL26 in 7PRC and 175 LRX w/ RL23 in 300WM. Given the whole Alliant powder dearth, I am looking at "swapping" to VV. I am curious if one of the aforementioned powder would work for both loads, vice having diff powders for the diff projectiles. I am running a 22" barrel on the 300 and a 20" on the 7. I may just grab a pound of each and try, but thought I'd see if anyone had specific experience with those powder/bullet combos.

Thanks.
 

thorson95

FNG
Joined
Apr 20, 2023
Messages
5
This summer, I put together a load using N565, 175 LRXs, Fed 215M primers, Peterson 300wm Long bass, in my 24" Tikka. I was pleased with the accuracy/precision, but velocity was a little sad. At 75.2 grs (max load), my rifle was about 2780 fps. I don't have any pictures of my grouping at 100yds, so I'll try remember to find those tonight. My SD's were below 10 fps. If I recall, my rifle was shooting about 0.75 to 1 MOA.
 

bmart2622

WKR
Joined
Jun 16, 2013
Messages
2,347
Location
Montana
I tried N570 in 2 WMs and 1 300 Ultra and while it was the fastest in all of them it was only marginally faster, like 30fps faster, compared to H1000 in 1 of the WMs and Retumbo in the ultra mag and other WM. Both Hodgon powders were more accurate so I went with those
 

Shooter Mike

Lil-Rokslider
Joined
Dec 7, 2021
Messages
211
I’m using N560 for Berger 168’s and 175’s for 7PRC and have had great results. I’m not running it super hot, but I have run some loads up to the 2980 range and still had great accuracy.

This is a 10 shot group

b3ade6c731efef0891a867226713e2f0.jpg



Sent from my iPhone using Tapatalk
 
Top