Moose/Elk/Caribou/Brown Bear Custom Rifle

[Rock’N Tacos]

So what does everyone think about this setup? I like the idea of having two barrels for one gun. I'm a little concerned about the weight for hunting. Thoughts?

• Best overall recommendation: Zermätt TL3 or SR3 action + TriggerTech Diamond + Proof CF prefit 280 AI (cerakote) + Zermätt Matterhorn.
• Expected carry weight: about 10–11 lb bare, ~11–12.5 lb scoped, depending on exact barrel length and optic.

What is the weight breakdown of your bare rifle? I can’r help but think you could easily get it to 7.5lbs bare, 9-9.5lbs scoped.

My 280 AI weighs about 7.8lbs scoped with a Nightforce ATACR 4-16x42

 

[WesternWisconsin]

What is the weight breakdown of your bare rifle? I can’r help but think you could easily get it to 7.5lbs bare, 9-9.5lbs scoped.

My 280 AI weighs about 7.8lbs scoped with a Nightforce ATACR 4-16x42

I haven't bought any of it yet. I was just considering that set-up.

 

[Rock’N Tacos]

I haven't bought any of it yet. I was just considering that set-up.

You should be able to get the bare rifle to 7-7.5lbs easy. You will be sitting pretty.

 

[HilltopHitman]

I don’t own but I think .280 AI is one of the best cartridges made.

 

[LightFoot]

So what does everyone think about this setup? I like the idea of having two barrels for one gun. I'm a little concerned about the weight for hunting. Thoughts?

• Best overall recommendation: Zermätt TL3 or SR3 action + TriggerTech Diamond + Proof CF prefit 280 AI (cerakote) + Zermätt Matterhorn.
• Expected carry weight: about 10–11 lb bare, ~11–12.5 lb scoped, depending on exact barrel length and optic.

Don’t need the TriggerTech Diamond, Special is enough.

I’d stick with the Zermatt Original, but either TL3 or SR3 would be fine.

Proof barrels are good.

Have it chambered in 30-06, 300 Win, 300 WSM, or 300 PRC, since brown bear is on the menu.

Send it to Spartan Precision Rifles (SPR) for the smith-work and have him bed it in a Pure Precision Altitude Stock.

SPR did this one for me. Had it chambered in 280 AI, but I wish I had it chambered in .338-06 AI. If it was a one and done rifle, .30-06.


Defiance AnTi-X Nitride Bolt LA STD
Bartlein 3B 22” + MBM 4-port
Pure Precision Altitude Stock & bottom metal
Federal 155 TA @ 2850 on the new barrel

Sent from my iPhone using Tapatalk

 

[UnckleBob]

What is the weight breakdown of your bare rifle? I can’r help but think you could easily get it to 7.5lbs bare, 9-9.5lbs scoped.

My 280 AI weighs about 7.8lbs scoped with a Nightforce ATACR 4-16x42

Mine weighs 7.7lbs bare with a 20" heavy shorter contour. With a scope and suppressor, it is probably 9.5 lbs(ish). But, I built that knowing I would be shooting from box blinds in Texas most of the time. It is also fun to practice with.

If I was a mountain hunter, I'd get a CF stock and a threaded barrel with the Tikka profile.

@WesternWisconsin should look hard at a CF stock or a light chassis like the Hunt26. A traditional chassis is just unnecessary for hunting. With the right barrel contour, he could closely replicate a Ruger Guide Gun for Brown Bear. He could used the same CF stock for a more traditional sized rifle.

 

[Rock’N Tacos]

Don’t need the TriggerTech Diamond, Special is enough.

I’d stick with the Zermatt Original, but either TL3 or SR3 would be fine.

Proof barrels are good.

Have it chambered in 30-06, 300 Win, 300 WSM, or 300 PRC, since brown bear is on the menu.

Send it to Spartan Precision Rifles (SPR) for the smith-work and have him bed it in a Pure Precision Altitude Stock.

SPR did this one for me. Had it chambered in 280 AI, but I wish I had it chambered in .338-06 AI. If it was a one and done rifle, .30-06.


Defiance AnTi-X Nitride Bolt LA STD
Bartlein 3B 22” + MBM 4-port
Pure Precision Altitude Stock & bottom metal
Federal 155 TA @ 2850 on the new barrel

Sent from my iPhone using Tapatalk

Whats the weight?

 

[Rock’N Tacos]

Don’t need the TriggerTech Diamond, Special is enough.

I’d stick with the Zermatt Original, but either TL3 or SR3 would be fine.

Proof barrels are good.

Have it chambered in 30-06, 300 Win, 300 WSM, or 300 PRC, since brown bear is on the menu.

Send it to Spartan Precision Rifles (SPR) for the smith-work and have him bed it in a Pure Precision Altitude Stock.

SPR did this one for me. Had it chambered in 280 AI, but I wish I had it chambered in .338-06 AI. If it was a one and done rifle, .30-06.


Defiance AnTi-X Nitride Bolt LA STD
Bartlein 3B 22” + MBM 4-port
Pure Precision Altitude Stock & bottom metal
Federal 155 TA @ 2850 on the new barrel

Sent from my iPhone using Tapatalk

Why don’t you feel like the 280 AI is enough? Mine has killed 5 big AK moose and I wouldnt hesitate to hunt brown bears with it.