Maven RS1.2 2.5-15x44 new model

[NorthColTim]

Thanks for showing us the sizes ... those are big bois, just like the Aadmounts.

Anyone know of a 'nub' version that fits the RS1.2?

@ChrisAU - ready to report on the various options you tried (and apols if I missed the post already ...).

Hi,
Take a look at this throw lever with a lower profile and affordable cost.

Scope Magnification Dial Throw Levers

These durable and custom fitted throw levers are built from the class leading Onyx™ material from Markforged. The lever portion is internally reinforced with continuous carbon […]

kestrelglassingsystems.com

Tim

 

[ChrisAU]

Thanks for showing us the sizes ... those are big bois, just like the Aadmounts.

Anyone know of a 'nub' version that fits the RS1.2?

@ChrisAU - ready to report on the various options you tried (and apols if I missed the post already ...).

Yes, the one from Kestrel is perfect and would be my choice for more. The switchview folding one also works, I’ll have to relook up the #.

 

[ChrisAU]

A note on the Switchview I posted works earlier, it can only index directly on top of the factory nub and because of that if extended will cause interference with your bolt handle likely. This is with just a 70* bolt throw action, if folded it’s fine and still works as a nice metal American made throw lever, but flipped up it will not work at all at 14-15x.

 

[bowrunner81]

A note on the Switchview I posted works earlier, it can only index directly on top of the factory nub and because of that if extended will cause interference with your bolt handle likely. This is with just a 70* bolt throw action, if folded it’s fine and still works as a nice metal American made throw lever, but flipped up it will not work at all at 14-15x.

View attachment 740527

Where did you get an FDE color scope from Maven? Or did you Cerakote it?

 

[ChrisAU]

Where did you get an FDE color scope from Maven? Or did you Cerakote it?

Cerakoted by Roman Arms in San Antonio TX. Always wanted to do it but never had a scope I loved enough to trust I'd keep it. Pricing is very reasonable and they are the best at laser re-engraving markings I've seen out there.

 

[Dobermann]

Do you think this could be a solution? Or still too long?

Fold Down Lever Top 1 Hole for Switchview Throw Lever | Switchview USA

Do you need a little less lever? Swap out your 2-hole lever for the lower profile single hole lever top. Shop online for yours today!

www.switchviewusa.com

 

[ChrisAU]

Do you think this could be a solution? Or still too long?

Fold Down Lever Top 1 Hole for Switchview Throw Lever | Switchview USA

Do you need a little less lever? Swap out your 2-hole lever for the lower profile single hole lever top. Shop online for yours today!

www.switchviewusa.com

View attachment 740767

Anything other than folded flat would be too long for me. But even folded flat it serves as a good throw lever.

 

[sndmn11]

Here's that mkm lever on RS1.2, RS3.2 on a vanguard, and then RS1.2 on Tikka T3 and T1X

I don't pay attention enough to know what degree bolt lift the Vanguard is.

 

[mxgsfmdpx]

Took my two go to rifles out for field day this morning before it gets to 105 degrees. Figured I’d check zero since it’s been a while…

As most of you know by now these two Tikkas in .260 and .223 both have Maven RS1.2s on them, see my posts here in this thread for more info.

Early June saw another 2,000 miles in the pickup and jeep with these bouncing around. Did some long range high wind shooting in Northern California as well as some blacktail deer scouting and coyote killing. Roughly 600 rounds through each gun.

July they banged around on nasty canyons in the Jeep doing some scouting, cross canyon wind shooting practice, and Rokslide cold bore challenge. I just got back from a 16 day trip to Wyoming which was 2,800 total miles in the pickup. These two guns plus a .243 Tikka each put another 1,200ish rounds through them while in Wyoming.

Zero check this morning at 100 yards. Two full magazines each, no time between shots. Shooting prone on a mat with Spartan short bipod and bino harness for rear rest.

It’s safe to say I’m very confident with these scopes going into big game season. We’ll start it off in August with California coastal blacktail followed by early September moose in Alaska. Will likely update here on how the scopes faired on those hunts if they end up taking shots.

 

[Dobermann]

Is it late July yet??

 

[MidGAHunter]

Is it late July yet??

Oh you thought they meant late July 2024? Nah man, they meant 2025.

 

[PredatoronthePrairie]

Anyone else concerned that with the demand they are are just going to rush getting them out. Opening up the potential for taking shortcuts, resulting in a diminished product?

 

[sndmn11]

Anyone else concerned that with the demand they are are just going to rush getting them out. Opening up the potential for taking shortcuts, resulting in a diminished product?

No

 

[KenLee]

Anyone else concerned that with the demand they are are just going to rush getting them out. Opening up the potential for taking shortcuts, resulting in a diminished product?

PSA sure did when their sales went crazy years ago.

 

[mxgsfmdpx]

Anyone else concerned that with the demand they are are just going to rush getting them out. Opening up the potential for taking shortcuts, resulting in a diminished product?

They don't manufacture the scopes, so, no.

 

[Reburn]

Anyone else concerned that with the demand they are are just going to rush getting them out. Opening up the potential for taking shortcuts, resulting in a diminished product?

Not at all. LOW is the company that manufactors the scopes and they build to spec. If they were built in house then maybe I would have a concern.

 

[KenLee]

Not at all. LOW is the company that manufactors the scopes and they build to spec. If they were built in house then maybe I would have a concern.

So the new "favorite" has no control over production, just like SWFA?

 

[Reburn]

So the new "favorite" has no control over production, just like SWFA?

I dont know who SWFA has build their scopes. But yea its similar.

 

[Shortschaf]

So the new "favorite" has no control over production, just like SWFA?

Tbf the most popular scope brand in the country (vortex) manufactures nothing

 

[ericmcd]

Tbf the most popular scope brand in the country (vortex) manufactures nothing

There is only a few companies in the world who can manufacturer optics and very few of them sell direct to consumer (some of the euro brands) Here's a bill of lading search tool
www.importyeti.com