LS Wild Armory 6 PRC barrel/rifle project

[Schmo]

0.279 nk?

I believe so. Loaded Lapua brass has right at a .275 neck diameter, so about a .004” clearance. Just right

 

[khuber84]

I believe so. Loaded Lapua brass has right at a .275 neck diameter, so about a .004” clearance. Just right

Agreed, I run ADG in my 6prc, it's right at 2745 loaded. 279 is perfect!

 

[hereinaz]

Lapua is no neck turn, and it seems to be among the thickest necks. It has been neck size and go with new Lapua brass.

 

[Odd1out]

Lapua is no neck turn, and it seems to be among the thickest necks. It has been neck size and go with new Lapua brass.

Thx to all for the info

Sent from my SM-G986W using Tapatalk

 

[mlevimadden]

We have been busy, and I need to get the word out, but we got out FFL website up and running. It has our barrels now.

We have 19” fluted 6 NSI (6 PRC wildcat) in stock. And, I will be doing another preorder as we build inventory.

www.lswildarmory.com

I found the barrel on your website, but it doesn’t mention the twist rate. Is it 7 or 7.5?

 

[Odd1out]

What brand go and no gauges are you using on the pbb 6nsi?

Sent from my SM-G986W using Tapatalk

 

[hereinaz]

I found the barrel on your website, but it doesn’t mention the twist rate. Is it 7 or 7.5?

The current barrels are 7 twist. Future barrels will be 7.5 twist. I put both into the Berger Twist calculator and don’t see a problem.

I have been shooting mostly 95 TMK and haven’t had a problem at all. I will be loading up more to try to pressure out and will see if anything happens.

 

[hereinaz]

What brand go and no gauges are you using on the pbb 6nsi?

Sent from my SM-G986W using Tapatalk

I have PTG.