Looking for a reputable shop to thread barrel and add a shoulder

[BRTreedogs]

Its OK that you dont understand how it works.

Maybe thinhorn can post a pic of the end so you can see its not an adapter.

Ok

 

[thinhorn_AK]

Its OK that you dont understand how it works.

Maybe thinhorn can post a pic of the end so you can see its not an adapter.

What sort of pic do you want? I can snap one right now.

 

[MuleyFever]

If I understand how it works there is nothing over any original threads in the form of an adapter so no line on the muzzle end showing 2 pieces. The wall thickness is the entire material between the bore and the outside threads.

 

[thinhorn_AK]

If I understand how it works there is nothing over any original threads in the form of an adapter so no line on the muzzle end showing 2 pieces. The wall thickness is the entire material between the bore and the outside threads.

That is correct. I’ll also add that the barrel is absolutely rifled to the muzzle.

 

[thinhorn_AK]

If I understand how it works there is nothing over any original threads in the form of an adapter so no line on the muzzle end showing 2 pieces. The wall thickness is the entire material between the bore and the outside threads.

 

[thinhorn_AK]

Ok

If you want to use those little adapters it’s cool, PM me, I have one I’ll send you for free.

 

[BRTreedogs]

If you want to use those little adapters it’s cool, PM me, I have one I’ll send you for free.

Thanks for the offer.
I'll admit its not a thread adapter.
You were rite I was wrong.
Your tall, I'm short.
You skinny, I'm fat.

Its a long threading, with a bushing.

Threading a THIN Sporter Barrel for a Suppressor (30-06 Example) – Ultimate Reloader

ultimatereloader.com

 

[id_jon]

Kampfeld is a stud. He will get you 100%

I sent a barrel to him Monday, and had it back on Saturday. I'm blown away, amazing work.

 

[Coopsdaddy]

I sent a barrel to him Monday, and had it back on Saturday. I'm blown away, amazing work.

Lets see some pics.

 

[id_jon]

Lets see some pics.

Brake installed by me, self timing SRS Lil Chub.

 

[Blaze2020]

I like that brake

 

[Red Letters]

Kampfield is a great person to work with. I just sent him a bolt to have fluted and I wanted a couple other things done and was not sure about pricing. He did the work and mailed back my parts within a week and mailed back my parts before I even paid for the work. Fast, quality work and the payment thing kind of took me back.

 

[Coopsdaddy]

That’s what I’m thinking about for a few field crafts,looks very well done and not botched up.

 

[Coopsdaddy]

Shaen rifles does top notch work. I should probably just make a whole thread about is since I’ve had 12 people PM me for details.

Do it!

 

[BBob]

Do it!

That’d be great and all but he quit taking new orders from new customers since he got so busy after all the publicity. His website has been non-functional for a bit too.

Edit: website back to working but still no new work.

 

[Coopsdaddy]

Don’t mean we can’t learn.
There’s other people that can do it if you can explain what exactly you want.

 

[Remington92]

Perhaps this is a dumb question but how much shoulder is typically advised to adequately seat either a suppressor mount or direct thread a can on something like 1/2x28? I see thunderbeast recommends barrel diameter of 0.6" are you all not meeting that or just adding shoulder for extra security?

 

[Coopsdaddy]

30 cal
Barrel is .655
Tbac ultra 7 dt
Shoulder needs to be .725
1.Would you thread barrel 5/8 and make a threaded adapter to thread over that with 5/8x24 outside threads and machine a shoulder and blend to barrel.
2.Thread barrel 9/6 and make a threaded adapter with outside threads 5/8x24 with shoulder.
3.Thread 1/2x28 and do the same as above.

They all seem to get to the same place but with some requiring more work.I have had some gunsmiths say whatever you want and some say they will only do the 1/2x28 route.
My concern is the barrel thickness on the 30cal or is that no concern once the adapter is loctited on.
The final product im after is similar to what Kampfield has done above.

 

[omicron1792]

I’ve used j sipp and sons with good success.

 

[wapitibob]

30 cal
Barrel is .655
1.Would you thread barrel 5/8 and make a threaded adapter to thread over that with 5/8x24 outside threads and machine a shoulder and blend to barrel.
2.Thread barrel 9/6 and make a threaded adapter with outside threads 5/8x24 with shoulder.
3.Thread 1/2x28 and do the same as above.

They all seem to get to the same place but with some requiring more work.I have had some gunsmiths say whatever you want and some say they will only do the 1/2x28 route.
My concern is the barrel thickness on the 30cal or is that no concern once the adapter is loctited on.
The final product im after is similar to what Kampfield has done above.

If you're going to use a self timer, thread the barrel 5/8. A self timing brake jam nut doesn't touch the barrel shoulder. If you're using a suppressor, you would want a shoulder roughly the same dia as the mounting nut dia. In that case, I would have the modification shown above.